518168
34
Zoom out
Zoom in
Previous page
1/44
Next page
32
1
2
3
4
00
80
Sewing
Sewing Zippers
The zipper foot E can be snapped on so
that it is located either to the right or to
the left of the needle, making it easy to
sew both sides of the zipper. To sew the
other side of the zipper, reposition the
zipper foot.
Lapped Zipper
1 Sew the seam together to the bottom
of the zipper placket. Baste the rest
of the seam. Leave about 2 cm open
at the top. Press seam open. Set the
needle to the right position.
2 Place presser foot E to the left of
the needle. From the wrong side
fold the fabric to one side so both
seam allowances are free. Fold
and press the left allowance under
approximately 0.5 cm from the
basted seam.
3 Place the zipper under the folded
seam allowance with the teeth as
near to the fold as possible and stitch
zipper to fabric close to fold. Begin
sewing at the bottom of the zipper.
Before reaching the zipper pull, lift
the presser foot and slide the zipper
pull down past the zipper foot.
Lower the foot and sew to the top of
the zipper.
4 Snap on the zipper foot so it is to
the right of the needle. Set the
needle to the left position. Turn
the garment to the right side. It is
important that the seam on the right
side is sewn straight. Before you
begin to sew, mark the seam line.
Sew the other side of the zipper.
Begin stitching across the bottom
and continue upwards. Remove the
basting.
If you want to sew a ”gentleman’s
zipper”, follow the instructions but
insert in the other direction.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna SCANDINAVIA 200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna SCANDINAVIA 200 in the language / languages: English as an attachment in your email.

The manual is 3,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna SCANDINAVIA 200

Husqvarna SCANDINAVIA 200 User Manual - Dutch - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info