610269
42
Zoom out
Zoom in
Previous page
1/48
Next page
42
Taking care of the machine
Trouble shooting
Any time you experience a problem when
sewing:
Select correct type and weight of fabric in the Sewing
Advisor.
Insert needle size and type as recommended on the
GraphicDisplay.
Rethread the top and bobbin threads.
Use different spool pin positions (vertical or horizontal).
Use thread nets and quality thread. We recommend the same
sewing thread on top and bobbin for general sewing. For
decorative sewing we recommend embroidery thread on top
and bobbin thread on bobbin.
If you experience problems when sewing the
Sensor Buttonhole:
Make sure the white area on the side of the wheel is lined up
with the white marking line on the foot.
Check to insure that the cord to the Sensor Buttonhole Foot
is properly plugged into the socket above the needle area
behind the light bulb.
Fabric Puckers?
Select correct type and weight of fabric in the Sewing
Advisor.
Check needle, it could be damaged.
Insert needle size and type as recommended on the
GraphicDisplay.
Rethread top and bobbin threads.
Change thread type to match fabric and sewing technique.
Use quality thread.
Shorten stitch length.
• Use stabilizer.
Check your thread tension.
Skipped Stitches?
Check needle - it could be damaged.
Change needle to recommended size and type.
Be sure the needle is inserted correctly all the way into the
clamp.
Rethread top and bobbin threads.
Use recommended presser foot.
Turn machine off and on to reset.
Consult your Authorized Husqvarna Viking dealer for service.
Needle Breaks?
Use care not to pull fabric when sewing.
Insert needle size and type as recommended on the
GraphicDisplay.
Insert needle correctly as described in the User’s Guide.
Poor Tension?
Enter fabric weight and type in the Sewing Advisor.
Rethread top and bobbin - use quality thread.
Insert needle size and type as recommended on the
GraphicDisplay.
Follow recommendations for thread tension.
Follow recommendations for stabilizer.
Upper Thread Breaks?
Does thread feed smoothly/not catching?
Use thread nets and quality thread. For special threads such
as metallic etc. please consult your Accessory User’s Guide for
special needle recommendations.
Rethread top and bobbin threads - check for correct
threading. When using embroidery thread on top, you should
use bobbin thread in the bobbin, not regular sewing thread.
Try different spool pin positions (horizontal or vertical).
If stitch plate hole is damaged, replace stitch plate.
Is the correct spool cap used in front of the thread?
Fabric Does Not Move?
Check to make sure feed teeth are up.
Increase stitch length.
Bobbin Thread Breaks?
Wind a new bobbin.
Replace the bobbin in the machine, check correct threading.
If stitch plate hole is damaged - replace stitch plate.
Clean bobbin area.
Bobbin Winds Irregularly?
Check threading for bobbin winding.
Wrong Stitch, Irregular or Narrow Stitches?
Turn machine off and on to reset.
Change needle, rethread top and bobbin threads.
• Use stabilizer.
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Sappire 870 Quilt at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Sappire 870 Quilt in the language / languages: English as an attachment in your email.

The manual is 3,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info