510451
32
Zoom out
Zoom in
Previous page
1/56
Next page
32
Operating the machine
Restart the buttonhole?
If you are sewing a buttonhole and stop to adjust the length
settings you will get this question once you start sewing again. If
you select “Yes”, the machine will restart and sew the buttonhole
from the beginning with the new settings. If you select “No”, the
change will be cancelled and the machine will continue sewing the
rest of the buttonhole with the previous settings. Use the arrow
buttons to select “Yes” or “No” and press the OK button.
Sensor One-Step Buttonhole Foot line up -
“Adjust white area to white line”
When you insert the fabric for sewing a buttonhole, the wheel
of the Sensor One-Step Buttonhole Foot might move. A pop-up
message prompts you to line up the white area with the white
line. Line up the white areas and close the pop-up message by
pressing the OK button.
Sensor One-Step Buttonhole Presser Foot
connected
The Sensor One-Step Buttonhole Foot can only be used for the
buttonhole stitches recommended for the foot. If the Sensor
One-Step Buttonhole Foot is connected and you select a stitch
that is not possible to sew with the foot, this message will appear
when you start to sew. Remove the foot or select a buttonhole
that can be sewn with the Sensor One-Step Buttonhole Foot.
Close the pop-up message by pressing the OK button.
Machine set for free motion sewing
This message is shown when the machine is set to Free Motion
Floating or Free Motion Spring Action and you turn on the
machine. Close the pop-up message by pressing the OK button.
Bobbin thread low (Only on 875 Quilt)
Your machine stops when the bobbin is almost empty. Replace
the empty bobbin with a full one and close the pop-up message
by pressing the OK button.
NOTE: Continue sewing without closing the pop-up
message if you want all thread on the bobbin to run out.
Remove thread from under stitch plate and
in bobbin area (Only on 875 Quilt)
When this pop-up message appears clean thread and lint from the
area under the stitch plate to allow the Selective Thread Cutter
to cut properly. Close the pop-up message by pressing the OK
button.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Sapphire 875 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Sapphire 875 in the language / languages: English as an attachment in your email.

The manual is 2,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna Sapphire 875

Husqvarna Sapphire 875 User Manual - Dutch - 56 pages

Husqvarna Sapphire 875 User Manual - French - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info