510448
30
Zoom out
Zoom in
Previous page
1/56
Next page
30
Operating the machine
Twin needle
If you are using a twin needle, set the size of the needle to limit
the width of all stitches and prevent needle breakage. Activate
or deactivate the twin needle function with the OK button and
use the left/right arrow buttons to set the twin needle size. Your
setting will be saved even when the machine is turned off. A
pop-up message reminds you of the setting when you turn on the
machine. Close the pop-up message by pressing OK.
NOTE: You cannot set the twin needle size if the Stitch
Width Safety is on, or turn on the Stitch Width Safety if
the machine is set for twin needle.
Stitch Width Safety
Use the OK button to turn on the Stitch Width Safety when
using a straight stitch needle plate or a straight stitch presser foot.
The stitch width will be limited to zero for all stitches to prevent
damage to the needle, presser foot and needle plate. This setting
is saved when the machine is turned off. A pop-up message
reminds you of the setting when you turn on the machine. Close
the pop-up message by pressing OK.
Buttonhole balance
If the Sensor One-Step Buttonhole Foot is not connected or if
you select stitch 1:25, the columns in the buttonhole stitch will
be sewn in different directions. On some fabrics this may cause
the columns to appear with different density. Use the left/right
buttons to balance the density between -7 and 7. The changes
only affect the selected stitch. If another stitch is selected or the
same stitch is selected again, the value is reset to the default value.
Free Motion Floating*
To sew in free motion with the included Embroidery/Darning
Foot R or with any optional Free Motion Floating presser foot,
set the machine in Free Motion Floating mode. The drop feed
teeth recommendation will be activated. The setting remains
when the machine is turned off. A pop-up reminds you of the
setting when you turn on the machine. Close the pop-up message
by pressing OK.
NOTE: You cannot set the machine in Free Motion
Floating Mode if Free Motion Spring Action is activated
or vice versa.
Free Motion Spring Action**
If you are using any of the optional Free Motion Spring Action
presser feet, you need to set the machine in Free Motion Spring
Action mode. The drop feed teeth recommendation will be
activated. The setting remains when the machine is turned off. A
pop-up message reminds you of the setting when you turn on the
machine. Close the pop-up message by pressing OK.
*Free Motion Floating
When you are sewing free motion in low speed the
foot will raise and lower with each stitch to hold the
fabric on the stitch plate while the stitch is being
formed. When sewing in high speed, the foot Á oats
over the fabric while sewing. The feed teeth must be
lowered and the fabric is moved manually. All stitches
can be sewn in free motion mode.
**Free Motion Spring Action
The Free Motion Spring Action presser feet follows
the up and down movement of the needle with help
of the spring and the arm on the presser foot. The
feed teeth must be lowered and the fabric is moved
manually. It is recommended to turn on the Stitch
Width Safety for the presser feet that are only intended
for straight stitch sewing.
Audible Alarm
Turns on or off all alarm sounds of the machine. Default setting
is on. This setting is saved even if the machine is turned off.
Contrast
Adjust the contrast of the GraphicDisplay by using the left/right
arrow buttons. The value can be set between –20 to 20 in steps
of 1. The setting is stored even when the machine is turned off.
Language
Use the left/right arrow buttons to change the language of all
text in your machine. The language setting is saved even if the
machine is turned off.
Software Version
The software version currently loaded for the sewing machine is
displayed.
30


Need help? Post your question in this forum.

Forumrules
1

Forum

husqvarna-sapphire-875-quilt

Reset search

  • How do I remove the temp plate to get small amounts of thread jammed Submitted on 24-9-2023 at 20:29

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna SAPPHIRE 875 Quilt at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna SAPPHIRE 875 Quilt in the language / languages: English as an attachment in your email.

The manual is 2,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna SAPPHIRE 875 Quilt

Husqvarna SAPPHIRE 875 Quilt User Manual - German - 56 pages

Husqvarna SAPPHIRE 875 Quilt User Manual - Dutch - 56 pages

Husqvarna SAPPHIRE 875 Quilt User Manual - French - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info