510448
23
Zoom out
Zoom in
Previous page
1/56
Next page
23
2
Operating the machine
Sewing Mode, 855/875 Quilt
Sewing Mode is the À rst view on the GraphicDisplay after you turn
on the machine. Here you will À nd all the basic information you need
to start sewing. This is also the menu where you adjust the settings of
your stitch. Straight stitch is selected by default.
1. Recommended needle for the selected fabric.
2. Recommended presser foot for the selected stitch.
3. The sewing speed is indicated by three, or, for 875 Quilt, À ve levels
shown on the GraphicDisplay. Reduce or increase the speed by
pressing the SPEED button or, on the 875 Quilt: SPEED+ or
SPEED– buttons.
4. The fabric and sewing technique selected on the Exclusive
SEWING ADVISOR™ feature.
5. Recommended thread tension for the selected fabric and stitch.
The recommendation is only shown on the 835 and 855 models.
On the 875 Quilt model, the tension is set automatically.
6. The selected stitch, both illustrated and displayed by number.
7. Stitch length. Reduce or increase the stitch length by pressing the
Stitch Length – and + buttons.
8. Needle position is shown instead of stitch width when straight
stitch is selected, or on 875 Quilt, when the Alternate View button
is pressed. Change the needle position by pressing the Stitch Width
– and + buttons.
9. Indicates that the function Mirror end to end* is activated
10. Indicates that the function Mirror side to side is activated.
11. Indicates that the stitch can be tapered when a Decorative
Tapering Stitch* is selected. Press the CLR button to open a view
with tapering settings.
12. Indicates that tapering beginning* is activated and the type of
angle.
13. Indicates that tapering end* is activated and the type of angle.
14. When sewing a manual buttonhole, the darning program or
tapering stitches*, the reverse icon is shown to indicate that you
need to press the reverse button when the buttonhole columns, the
darning stitch or the tapering stitch* are sewn to the desired length.
15. Stitch density is shown instead of stitch length when a buttonhole,
bartack or darning stitch is selected or when a satin stitch is
selected and the Alternate View button is pressed. Reduce or
increase the stitch density by pressing the Stitch Length – and +
buttons.
16. Stitch width. Reduce or increase the stitch width by pressing the
Stitch Width – and + buttons.
17. Buttonhole size indication when using the Sensor One-Step
Buttonhole Foot. Set the size of the button by pressing the up and
down arrow buttons.
18. Recommendation to use stabilizer under your fabric.
19. The icon for lowering the feed teeth is shown when free motion is
activated or sewing on buttons is selected.
20. Set the number of stitches to sew on the button by pressing the up
and down arrow buttons.
21. Recommendation to use the multipurpose tool/button reed when
sewing on a button. Place the thin end of the multipurpose tool/
button reed under the button when sewing on light fabrics. Use
the thick end for heavier fabrics.
Sensor One-Step Buttonhole
Normal Sewing Mode, Straight stitch
Manual Buttonhole
Sewing on button
875 Quilt, Normal Sewing Mode, Decorative
stitch
*Only on 875 Quilt
1
2
3
4
5
6
7
8
15
16
17
18
14
19
20
21
9
10
3
11
13
12
23


Need help? Post your question in this forum.

Forumrules
1

Forum

husqvarna-sapphire-875-quilt

Reset search

  • How do I remove the temp plate to get small amounts of thread jammed Submitted on 24-9-2023 at 20:29

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna SAPPHIRE 875 Quilt at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna SAPPHIRE 875 Quilt in the language / languages: English as an attachment in your email.

The manual is 2,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna SAPPHIRE 875 Quilt

Husqvarna SAPPHIRE 875 Quilt User Manual - German - 56 pages

Husqvarna SAPPHIRE 875 Quilt User Manual - Dutch - 56 pages

Husqvarna SAPPHIRE 875 Quilt User Manual - French - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info