518162
28
Zoom out
Zoom in
Previous page
1/48
Next page
28
Operating the machine
SET Menu
You can change the pre-set machine settings and make manual
adjustments to the automatic functions in the SET Menu. Open
the menu by pressing the SET Menu button and select the setting
you wish to adjust by pressing the up/down arrow buttons. To
activate the function, use the left/right arrow to place an X in the
box. To cancel the function, use the left/right arrows to leave the
box empty. Press the SET Menu button again to leave the SET
Menu.
Presser foot pressure
The automatic setting of the presser foot pressure is calculated
from the fabric selected in the Sewing Advisor. Use the left/right
arrow buttons if you want to adjust the presser foot pressure for
the selected stitch. The value can be adjusted between 0 and 9
in steps of 0.5. Your manual setting will be cancelled when you
select another stitch or turn off the machine.
NOTE: Since the setting of the presser foot pressure only
applies to the selected stitch it is not possible to adjust the
pressure on programs.
Pivot height
If Free Motion is activated you will be able to set the height of
the presser foot pivot position. The pivot position can be raised
or lowered in 15 steps by pressing the left/right arrow buttons.
Sensor Foot auto
Use the left/right arrow buttons to turn off the automatic
function for lifting the presser foot when stopping with the
needle down. The setting will go back to default when the
machine is turned off.
FIX auto
Use the left/right arrow buttons to turn off the automatic FIX
function in the beginning of each stitch. Your setting will be
saved even when the machine is turned off.
Automatic thread tension (Only on 870 Quilt)
The 870 Quilt will automatically set the best thread tension for
the selected stitch and fabric. Use the left/right arrow buttons if
you need to adjust the thread tension. The changes only affect the
selected stitch. If another stitch is selected or the same stitch is
selected again, the value is reset to the default value. The setting
will go back to default when the machine is turned off.
Selective Thread Cutter (Only on 870 Quilt)
The Selective Thread Cutter will automatically cut the threads and
the presser foot will raise after a sensor buttonhole or eyelet is
sewn. Use the left/right arrow buttons to turn off this function.
The setting will go back to default when the machine is turned
off.
850, Machine SET Menu
850, Machine SET Menu
870 Quilt, Machine SET Menu
850, Machine SET Menu
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna SAPPHIRE 870 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna SAPPHIRE 870 in the language / languages: English as an attachment in your email.

The manual is 6,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info