518162
24
Zoom out
Zoom in
Previous page
1/48
Next page
24
4.
6.
Operating the machine
Programming
The programming function on your machine makes it possible to
create stitches with your own personal settings and to combine
stitches and letters into stitch programs. You can add up to 40
stitches and letters in the same program. Save your own stitches
and programs in My Stitches and recall them any time you like.
All stitches in your sewing machine are programmable except
for buttonholes, darning, tapering stitches*, button sewing and
bartacks.
Create a stitch program
1. Press the PROG button to open the mode for programming.
2. The stitch menu which was previously selected will be kept
when entering the program mode. To change the stitch menu,
press the Stitch Menu button and select another stitch menu
by using the arrow buttons.
3. Press the number of the stitch you wish to use. The stitch will
appear in Programming Mode.
4. Press the number of the next stitch and it will appear to the
right of the last entered stitch.
NOTE: Two numbers are displayed above the stitch
program on the left side of the GraphicDisplay. The
rst number is the position of the selected stitch in the
program. The second number, put in brackets, is the total
number of stitches in the program.
Add letters
5. Press the Font Menu button. Use the arrow buttons to select
a font and press OK. The machine will show the upper case
alphabet in Programming Mode.
6. Use the arrow buttons to select a letter and press OK to add
the letter to the program.
7. To switch to a lower case alphabet or numbers press the Shift
button.
About programming letters
Both upper and lower case letters will be stitched with a 7 mm
stitch width. If there are letters going below the baseline included
in the program (e.g. j, p, y) the height of the uppercase letters will
be reduced.
All text to be sewn out on the same project, should be in the
same program to insure the letters are sewn out in the same
height.
For instance, a name and an address should be in the same
program with a STOP after the name.
Programming Mode
Husqvarna and VIKING are in the same program.
Husqvarna and VIKING have been programmed separately.
*Only on 870 Quilt
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna SAPPHIRE 870 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna SAPPHIRE 870 in the language / languages: English as an attachment in your email.

The manual is 6,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info