518161
32
Zoom out
Zoom in
Previous page
1/48
Next page
32
Operating the machine
Main motor overload
If you are sewing on very heavy fabric or if the machine is
blocked when sewing, the main motor can get overloaded. The
pop-up message will close when the main motor and power
supply is secure.
The stitch cannot be programmed
This message is shown if you try to program or add a buttonhole,
bartack or taper stitch* or the sew on button stitch to a program.
All stitches in your sewing machine are programmable except for
these. Close the pop-up message by pressing the OK button.
The stitch cannot be saved
This message is shown if you try to save a buttonhole, bartack,
darning or taper stitch* or the sew on button stitch to My
Stitches. All stitches in your machine can be saved in My Stitches
except for these. Close the pop-up message by pressing the OK
button.
Program too long to add more stitches
If you try to add more than 40 stitches or letters in the same
program this message is shown. Close the pop-up message by
pressing the OK button.
NOTE: If you add a FIX, STOP or a Selective Thread
Cut* to the program these will each use one memory
space in the program.
The combination of commands is incorrect
If you are programming stitches or letters and try to insert any of
the commands STOP, FIX or Selective Thread Cut* into a stitch
program in an order that is not allowed, this message will appear.
Close the pop-up message by pressing the OK button.
Commands removed from program
If you try to insert a previously saved program into a new one or
if you are using the mirroring end to end function* on the whole
program, the result may be that the commands are put in an order
that is not allowed. To avoid this, the commands will be removed
from the program. Close the pop-up message by pressing the OK
button.
*Only on 870 Quilt
32


Need help? Post your question in this forum.

Forumrules
1

Forum

husqvarna-sapphire-850

Reset search

  • what is causing my stitches to gather when sewing two pieces of fabric together? Submitted on 14-10-2021 at 19:12

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna SAPPHIRE 850 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna SAPPHIRE 850 in the language / languages: English as an attachment in your email.

The manual is 6,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info