518160
45
Zoom out
Zoom in
Previous page
1/48
Next page
45
19 19 19
Elastic Stitch or
Smocking
A/B Sew over two rows of elastic thread for elastic shirring.
20 20 20
Bridging stitch A/B For joining two pieces of fabric with nished edges and for elastic shirring.
21 21 21
Darning Stitch
(forward and
backward)
A/B Darn and mend small holes in work clothes, jeans, tablecloths and more. Stitch over the hole, press
reverse for continuous darning and auto stop.
22 22 22
Bartack
(manual)
A/B Reinforce pockets, shirts openings, belt loops as well as at lower end of a zipper.
23 23 23
Round End
Buttonhole
Sensor
Buttonh.
Foot/C
For blouses and childrens garments.
24 24 24
Medium
Reinforced
Buttonhole
C For medium and heavy fabrics.
25 25 25
Heirloom
Buttonhole
Sensor
Buttonh.
Foot/C
For “hand look” on ne and delicate fabrics. Tip: For jeans buttonholes, increase length and width of
the buttonhole. Use thicker thread.
26 26 26
Keyhole
Buttonhole
Sensor
Buttonh.
Foot/C
For tailored jackets, coats, etc.
27 27 27
Heavy Duty
Buttonhole
Sensor
Buttonh.
Foot/C
With reinforced bartacks.
28 28 28
Leather Straight
Stitch Buttonhole
A/B For leather and suede.
29 29 29
Eyelet B For belts, laces, etc.
––30
Automatic Taper
Stitch
B Begins and ends with a point. Used for corners, points and satin stitch lettering.
Press reverse to taper.
––31
Tapering stitch B Begins and ends with a point. Used for corners, points and satin stitch lettering.
Press reverse to taper.
30 30 32
Satin stitch,
narrow
B For appliqués, sewing on laces and trims. For light and medium fabrics.
31 31 33
Satin stitch,
medium
B For appliqués, sewing on laces and trims. For light and medium fabrics.
32 32 34
Satin stitch, wide B For appliqués, sewing on laces and trims. For heavy fabrics.
–3335
Scallop Wave B For edge nishing. Trim away fabric outside scallops.
33 34 36
Narrow Rick
Rack Stitch
B For edge nishing. Trim away fabric outside scallops.
34 35 37
Scallop Stitch B For edge nishing. Trim away fabric outside scallops.
–3638
Scallop Stitch B For edge nishing. Trim away fabric outside scallops.
35 37 39
Satin Arrow
Head
B For edge nishing. Trim away fabric outside scallops.
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna SAPPHIRE 830 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna SAPPHIRE 830 in the language / languages: English as an attachment in your email.

The manual is 6,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info