518160

Husqvarna SAPPHIRE 830 Manual

31
Zoom out
Zoom in
Previous page
1/48
Next page
31
2
Operating the machine
Restart the buttonhole?
If you are sewing a buttonhole and stop to adjust the length
settings you will get this question once you start sewing again. If
you select “Yes”, the machine will restart and sew the buttonhole
from the beginning with the new settings. If you select “No”, the
machine will continue sewing the rest of the buttonhole with the
new settings. Use the arrow buttons to select “Yes” or “No” and
press the OK button.
Sensor Buttonhole Foot line up - “Adjust
white area to white line”
When you insert the fabric for sewing a buttonhole, the wheel
of the Sensor Buttonhole Foot might move. A pop-up message
prompts you to line up the white area with the white line. Line up
the white areas and close the pop-up message by pressing the OK
button.
Sensor Buttonhole Presser Foot connected
The Sensor Buttonhole Foot can only be used for the buttonhole
stitches recommended for the foot. If the Sensor Buttonhole
Foot is connected and you select a stitch that is not possible to
sew with the foot, this message will appear when you start to sew.
Remove the foot or select a buttonhole that can be sewn with the
Sensor Buttonhole Foot. Close the pop-up message by pressing
the OK button.
Machine set for free motion sewing
This message is shown when the machine is set to Free Motion
Floating or Free Motion Spring Action and you turn on the
machine. Close the pop-up message by pressing the OK button.
Bobbin thread low (Only on 870 Quilt)
Your machine stops when the bobbin is almost empty. Replace
the empty bobbin with a full one and close the pop-up message
by pressing the OK button.
NOTE: Continue sewing without closing the pop-up
message if you want all thread on the bobbin to run out.
Remove thread from under stitch plate and
in bobbin area
(Only on 870 Quilt)
When this pop-up appears you need to clean the area under the
stitch plate from thread and lint. Close the pop-up message by
pressing the OK button.
… 31 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna SAPPHIRE 830 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna SAPPHIRE 830 in the language / languages: English as an attachment in your email.

The manual is 6,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info