518160
30
Zoom out
Zoom in
Previous page
1/48
Next page
30
Operating the machine
Pop-up messages
Bobbin winding on
This pop-up message appears when the bobbin winding spindle is
pushed to the right and bobbin winding is activated.
Presser foot too high
Your machine will not sew if there is too much fabric under the
presser foot. Remove some of the fabric or use another fabric.
Press the OK button, or tap the foot control to close the pop-up
message.
Machine set for twin needle
When you have set the machine for twin needle in the SET Menu,
a pop-up message is shown to remind you of the setting when
you turn on your machine. Press the OK button or tap the foot
control to close the pop-up message.
Stitch width limited for twin needle
This message is shown when the machine is set for twin needle
and you select a stitch. It informs you that the width of the stitch
is limited. You will also get this message when the machine is set
for twin needle and you try to adjust the stitch width to wider
than possible with the twin needle. Close the pop-up message by
pressing the OK button.
Machine set for straight stitch
This message is shown when the stitch width safety is on and you:
- turn on the machine,
- select a stitch wider than 0 mm,
- try to adjust the stitch width.
Close the pop-up message by pressing the OK button.
This stitch cannot be sewn with twin needle
This pop-up message appears when the machine is set for twin
needle and you select the stitch for sewing on a button, No. 9.
Press the OK button to close the pop-up.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna SAPPHIRE 830 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna SAPPHIRE 830 in the language / languages: English as an attachment in your email.

The manual is 6,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info