518160

Husqvarna SAPPHIRE 830 Manual

25
Zoom out
Zoom in
Previous page
1/48
Next page
25
2
Operating the machine
Add stitches or letters at other positions
If you wish to add a stitch or letter at another position in the
program, move the cursor by pressing the arrow buttons. The
stitch or letter will be inserted to the right of the cursor.
NOTE: When programming letters, press the arrow down
button to activate the cursor in the stitch program instead
of in the alphabet.
Add the same stitch several times
If you want to add the same stitch several times in a row you can
just press the OK button directly after the fi rst stitch has been
inserted. The same stitch will be inserted each time you press
OK.
You can also move the cursor to select another stitch and press
the OK button. The selected stitch will be inserted once more to
the right of the selected stitch.
Delete stitches or letters
To delete a stitch in the program, select the stitch with the cursor
by pressing the arrow buttons and press the Clear (CLR) button.
To delete the whole program, move the cursor to the left of the
fi rst position and press the Clear (CLR) button. A pop-up will
appear asking you to verify the deletion. Select Yes or No with the
arrow buttons and press OK.
Add commands
The commands FIX, STOP and Selective Thread Cut* can be
added to the program. Each command takes one memory space
in the program.
NOTE: If autofi x is activated on your machine you do not
need to add a FIX in the beginning of the program.
Join two stitch programs into one
You can add a previously saved program to a new one in
Programming Mode. Press the Stitch Menu button, select My
Stitches and the program you wish to add. Press OK and the
program will be inserted in Programming Mode to the right of
the cursor.
Adjust a single stitch or letter
To adjust the settings of a single stitch in a program you must
select the stitch in Programming Mode. You can adjust the stitch
width, stitch length, density, or mirror the stitch.
Add commands
Adjust a single stitch or letter
*Only on 870 Quilt
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna SAPPHIRE 830 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna SAPPHIRE 830 in the language / languages: English as an attachment in your email.

The manual is 6,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info