518160
19
Zoom out
Zoom in
Previous page
1/48
Next page
19
2
10
11 12
15
13
14
16 17 18
19
21
24
20
25
850
10
11 12
15
13
14
16 17 18
19
21
24
20
25
830
Operating the machine
Function buttons on the Touch Panel
10. Alternate View
When you select a satin stitch the length and width settings will
be shown on the GraphicDisplay. By pressing the Alternate View
button the density setting will be shown instead of the length
setting.
On the 870 Quilt model the stitch position settings will be shown
instead of the stitch width when you press the Alternate View
button.
11. Stitch Length/Density
When you select a stitch, your machine automatically sets the best
stitch length. The stitch length is visible on the GraphicDisplay.
You can change the stitch length by pressing the + or – button.
If you have selected a buttonhole the GraphicDisplay will show
the density setting instead of the stitch length setting. You will
now be able to change the density setting by pressing the + and
– buttons.
If you press the Alternate View button the GraphicDisplay
will show the density setting for satin stitches. Use the + and
– buttons to change the setting.
12. Stitch Width/Needle position
The stitch width is set in the same manner as the stitch length.
The preset width is visible on the GraphicDisplay. The width can
be adjusted between 0 and 7 mm. Some stitches have a limited
stitch width.
If a straight stitch is selected, the + and – buttons are used to
move the needle to the left or right in 29 positions.
870 Quilt: Stitch Positioning
The Stitch Positioning function in the 870 Quilt model makes
it possible to change the needle position of all stitches. Press
the Alternate View button and the GraphicDisplay will show
the needle position instead of the stitch width settings. You will
now be able to change the needle position to the left or right by
pressing the + and – buttons. The needle position can only be
changed to the limit of the maximum stitch width. Changing the
needle position will also limit the stitch width adjustment.
13. Clear
Press this button to delete a single stitch or all stitches in a
stitch program. Or use it to delete your saved stitches and stitch
programs in the My Stitches Menu.
14. Stitch Selection Buttons
By pressing any of the 0 to 9 buttons you select the stitch
illustrated on that button immediately.
By pressing two digits in quick succession you will be able to select
a stitch from 10 and up from the selected stitch menu. If the stitch
number does not exist in the selected stitch menu you will hear a
beep and the rst entered digit will be selected as a stitch.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna SAPPHIRE 830 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna SAPPHIRE 830 in the language / languages: English as an attachment in your email.

The manual is 6,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info