518160

Husqvarna SAPPHIRE 830 Manual

13
Zoom out
Zoom in
Previous page
1/48
Next page
13
1
12
3
4
A
B
C
Getting ready to sew
Needle threader
The needle must be in the up position to use the built-in needle
threader. We also recommend lowering the presser foot.
1. Use the handle to pull the needle threader all the way down,
catching the thread under the guide (A).
2. Push back to bring the needle threader forward until the metal
fl anges cover the needle. A small hook will pass through the
needle eye (B).
3. Place the thread under the fl anges in front of the needle, so
the thread catches into the small hook (C).
4. Let the needle threader gently swing back. The hook pulls the
thread through the needle eye and forms a loop behind the
needle. Pull the thread loop out behind the needle.
5. Place the thread under the presser foot.
NOTE: The needle threader is designed to be used for size
70-120 needles. You cannot use the needle threader for
size 60 needles or smaller, the wing needle, twin needle,
triple needle or when the Sensor Buttonhole Foot is on.
There are also some other optional accessories that require
manual threading of the needle.
When threading the needle manually, make sure that the
needle is threaded from front to back. The white presser
foot ankle makes it easy to see the eye of the needle. The
bobbin case cover can be used as a magnifying glass.
Cutting the thread
Once you have fi nished sewing, you can cut the threads by raising
the presser foot and draw the threads to the left side of the
machine through the thread cutter.
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna SAPPHIRE 830 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna SAPPHIRE 830 in the language / languages: English as an attachment in your email.

The manual is 6,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info