684091
9
Zoom out
Zoom in
Previous page
1/152
Next page
damage to property or adjacent areas. Do
not touch the engine or exhaust system
during or directly after operation. When you
mow, keep away from bushes and other
objects.
Do not move the product with the collector tilted.
This can damage the collector and increase the risk
that the product overturns.
Always look down and back before and while you
move in reverse. Keep a look out for large and small
obstacles.
Decrease the speed before you turn a corner.
Move around fixed objects carefully, make sure that
the blades do not hit. Do not mow across objects.
Stop the blades when you do not mow.
CAUTION: Read the caution instructions
that follow before you use the product.
Before you operate the product, clear the engine
cooling air intake from grass, dirt, etc. If the engine
can not become cool there is a risk of serious engine
damage.
Stop and examine the product and cutting deck if
you mow across or into anything. If necessary, make
repairs before you restart.
Personal protective equipment
WARNING: Read the warning instructions
that follow before you use the product.
Use approved personal protective equipment when
you use the product. Personal protective equipment
cannot fully prevent injury but it decreases the
degree of injury if an accident does occur. Let your
dealer help you select the right equipment.
Always wear approved hearing protection. Long term
exposure to noise can result in permanent hearing
impairment.
Always wear protective shoes or protective boots.
Steel toes are recommended. Do not use the
product barefoot.
Wear gloves when necessary, for example when you
attach, examine or clean the cutting equipment.
Do not wear loose-fitting clothing, jewelry or other
items that can get caught in moving parts.
Keep first aid equipment and fire extinguisher close
at hand.
Safety devices on the product
WARNING: Read the warning instructions
that follow before you use the product.
Do not use a product with defective safety devices.
Do a check of the safety devices regularly. If the
safety devices are defective, speak to your
Husqvarna service agent.
Do not make modifications on safety devices. Do not
use the product if protective plates, protective
covers, safety switches or other protective devices
are not attached or are defective.
To do a check of the ignition lock
Start and stop the engine to do a check of the
ignition lock. See
To start the engine on page 16
and
To stop the engine on page 18
.
Make sure that the engine starts when you turn the
ignition key to START.
Make sure that the engine stops immediately when
you turn the ignition key to STOP.
Safety circuit
The engine can only be started when the conditions are
met as follows:
The cutting deck is lifted and the parking brake is
applied.
The engine must stop in the situations that follow:
The cutting deck is lowered and the operator lifts
from the seat.
The cutting deck is lifted, the parking brake is not
applied and the operator lifts from the seat.
To do a check of the safety circuit, try to start the engine
with one of the conditions above not met. Change the
conditions and try again. Do this check daily.
Sensors for the auger and the collector
Turn the ignition on but do not start the engine. Do a
check of each sensor as given in the table below. Make
sure that the related symbol on the auger control switch
lights up.
Lower the auger servicing position lever. If
the sensor functions correctly, the symbol
lights up red.
Do not attach the cutting deck. If the sensor
functions correctly, the symbol lights up red
and a beep is heard when the ignition is
turned to on.
368 - 004 - 9
9


Need help? Post your question in this forum.

Forumrules
1

Forum

husqvarna-rc-320ts-awd

Reset search

  • 320 Rd mower will not moved or engage when brake is released Submitted on 9-4-2022 at 17:20

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna RC 320Ts AWD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna RC 320Ts AWD in the language / languages: English, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 7,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna RC 320Ts AWD

Husqvarna RC 320Ts AWD User Manual - German, Dutch, French - 156 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info