684090
21
Zoom out
Zoom in
Previous page
1/152
Next page
engine can increase the fire risk and the risk that the
engine becomes too hot. Let the engine cool before it is
cleaned. Clean with water and a brush.
Grass cuttings around the muffler dry quickly and are a
fire risk. Use a brush or remove the grass cuttings with
water when the muffler is cold.
To clean the engine cooling air intake
Make sure that the engine cooling air intake is not
blocked. Remove grass and dirt with a brush.
To clean the hydraulic oil cooler
Only for RC 320Ts AWD.
Make sure that the hydraulic oil cooling fan is not
blocked and that the area around the hydraulic oil cooler
is clean. Remove grass and dirt with a brush.
To remove blockage from the auger
If the symbol on the auger button is red and the product
beeps continuously, the auger is blocked. The blockage
must be manually removed.
1. Tilt the collector.
2. Pull the auger maintenance tool loose from the
bottom of the collector.
3. Put the auger maintenance tool into the hole at the
top part of the auger.
4. Hold the auger maintenance tool and turn the auger
counterclockwise 5 full turns. The cause of the
blockage is sent down and out of the auger.
5. Pull the auger maintenance tool out and put it back
into the holder on the bottom of the collector.
6. Lower the collector to operating position and start
the engine.
7. If the symbol on the auger button is red and the
product beeps when the engine starts, stop the
engine.
8. Put the cutting deck in servicing position and
manually remove blockage from the auger inlet.
9. Put the cutting deck in mowing position and start the
engine.
10. If the symbol on the auger button is red and the
product beeps when the engine starts, stop the
engine.
11. Let an authorized service agent help you.
Note: When the blockage is removed, the product starts
in non-collect mode and you must select collect mode
again.
368 - 004 - 21
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna RC 318T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna RC 318T in the language / languages: English, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 7,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna RC 318T

Husqvarna RC 318T User Manual - German, Dutch, French - 156 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info