Manual Husqvarna R 420TsX AWD (page 27 of 168) (English, Italian, Portuguese, Spanish)

733964

Zoom out

Zoom in

1/168

11. Loosen the locknut (A) on the clevis joint on the

height adjustment stay. Turn the clevis joint (B) on

the height adjustment stay to adjust the length of the

height adjustment stay. Make sure that the clevis

joints align with the correct hole on the frame of the

cutting deck.

Note: The 2 ends of the height adjustment stay each

have a clevis joint. You get the same result

independently of which clevis joint you adjust.

12. Use the middle hole (A) on the frame in the cutting

deck.

13. Tighten the locknuts on the height adjustment stay.

14. Move the cutting height lever to the cutting height

position 1.

15. Remove the right footrest plate. Refer to

To remove

and install the right footrest plate on page 21

16. Loosen the locknut (A) on the stretching screw of the

cutting height chain.

17. Turn the adjustment screw (B) on the cutting height

chain until the bearing wheel (C) touches the

lever(D).

18. Tighten the locknut on the stretching screw.

19. Do a check of the parallelism. Refer to

To do a

check of the parallelism of the cutting deck on page

20. Attach the right footrest plate.

To remove the BioClip plug

• Remove the BioClip plug to change a Combi cutting

deck from BioClip to rear discharge of the grass.

To remove and attach the BioClip plug on the

cutting deck Combi 103, Combi 112, Combi

122

1. Put the cutting deck in servicing position. Refer to

put the cutting deck in the servicing position on page

880 - 002 - 28.02.2019 27

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna R 420TsX AWD in the language / languages: English, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 11,21 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna R 420TsX AWD

Husqvarna R 420TsX AWD User Manual - German, Dutch, French - 172 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Husqvarna R 420TsX AWD Manual

Product: