610264

Husqvarna Prelude 360 Manual

23
Zoom out
Zoom in
Previous page
1/32
Next page
Seu’in
Sewing
Terry
Cloth
l’erry
cloth
is
a
rather
loosely
woven
fabric
in
which
seams
easily
break.
Sew
the
garment
together
with
straight
stitch.
Trim
the
seams
and
press
the
seam
allowance
flat
and
sew
the
edges
down
against
the
garment
on
the
wrong
side
with
three-step
zigzag.
Even
though
the
stitching
goes
right
through
to
the
“right”
side
of
the
garment,
it
is
nearly
invisible
and
even
the
wrong
side
looks
neat.
Seam
and
Overcast
Some
stitches
can
he
used
for
seaming
and
overcasting
directly
on
the
edge
where
a
5
mm
(1/’i”)
seam
is
allowed,
Place
the
fabric
so
that
the
inside
right
“toe
of
the
presser
_________
toot
follows
the
edge
of
the
fabric.
Presser
foot
J
is
also
used
to
overlock
and
overcast
many
different
fabrics
with
the
exception
of
heavy,
firm
fabrics.
The
pin
on
the
presser
foot
should
follow
the
edge
of
the
Fabric
and
will
prevent
the
fabric
from
puckering.
Stitch
width
5.5
mm.
Follow
the
recommended
setting,
given
ftr
stitch
length.
Overcast
stitch
may
he
used
to
sew
light
and
medium
non-stretch
fabric
and
light
stretch
fahric.
Snap
on
presser
foot
J.
()verlock
is
chiefly
used
for
sewing
heavy
stretch
fabric.
Snap
on
presser
foot
B.
21
… 23 …


Need help? Post your question in this forum.

Forumrules
1

Forum

husqvarna-prelude-360

Reset search

  • How do I change from buttonhole mode to straight sewing. Machine will only sew a very short stitch. Submitted on 20-9-2023 at 04:41

    Reply Report abuse

  • How do I lower the feed teeth on Husqvarna Viking prelude 360? Submitted on 3-8-2022 at 02:23

    Reply Report abuse

  • How do I lower the feed teeth on Husqvarna Viking prelude 360 Submitted on 3-8-2022 at 02:22

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Prelude 360 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Prelude 360 in the language / languages: English as an attachment in your email.

The manual is 0,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info