610264

Husqvarna Prelude 360 Manual

6
Zoom out
Zoom in
Previous page
1/32
Next page
I
I’rKethres
Connecting
the
Foot
Control
Among
the
accessories
you
will
find
the
ftot
control
cord
and
the
main
cord.
1.
Remove
the
foot
control
cord.
Place
the
foot
control
on
its
narrow
side.
Fit
the
plug
into
the
socket
inside
the
toot
con
trol
compartment.
2.
Push
it
firmly
to
make
sure
it
is
properly
connected.
This
operation
is
only
neces
sary
the
very
first
time
you
are
going
to
use
the
machine.
3.
lo
correctly
turn
away
the
cord,
place
it
into
the
slot.
Note:
Before
plugging
in,
check
to
ensure
that
the
foot
conntrol
is
of
“type
FR2”.
Connecting
to
the
Power
Supply
On
the
underside
of
the
machine
you
will
find
information
about
the
power
supply
(V)
and
the
frequency
(lIz).
Check
the
power
supply
setting
in
the
machine
to
ensure
that
this
agrees
with
the
main
supply
before
you
connect
the
machine.
1.
Connect
the
foot
control
cord
to
the
ñrst
socket
on
the
bottom
right
side
of
the
machine.
2.
Connect
the
main
cord
to
the
hack
socket
on
the
bottom
right
side
of
the
machine.
3.
When
you
press
the
power
switch,
both
the
machine
and
the
light
are
switched
on.
For
the
USA
and
Canada
This
Sewing
Machine
has
a
polarized
plug
(one
blade
wider
than
the
other).
To
reduce
the
risk
of
electric
shock,
this
plug
is
intended
to
fit
in
a
polarized
outlet
only
one
way.
If
the
plug
does
not
fit
fully
in
the
outlet,
reverse
the
plug.
If
it
still
does
not
fit,
contact
a
qualified
electrician
to
install
the
proper
outlet.
l)o
not
modify
the
plug
in
any
way.
4
3.
I.
2.
I
… 6 …


Need help? Post your question in this forum.

Forumrules
1

Forum

husqvarna-prelude-360

Reset search

  • How do I change from buttonhole mode to straight sewing. Machine will only sew a very short stitch. Submitted on 20-9-2023 at 04:41

    Reply Report abuse

  • How do I lower the feed teeth on Husqvarna Viking prelude 360? Submitted on 3-8-2022 at 02:23

    Reply Report abuse

  • How do I lower the feed teeth on Husqvarna Viking prelude 360 Submitted on 3-8-2022 at 02:22

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Prelude 360 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Prelude 360 in the language / languages: English as an attachment in your email.

The manual is 0,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info