518135
12
Zoom out
Zoom in
Previous page
1/64
Next page
10
1
2
10 15
a
b
c
d
b
a
b
c
Learn your Platinum
Placing the Bobbin in the Machine
Switch off the main switch.
1. Remove the bobbin cover by sliding it
towards you.
2. Place the bobbin in the bobbin case with
the mark “H” facing up and the thread to
the left of the bobbin. The bobbin will then
rotate counter clockwise when pulling out
the thread.
3. Place your À nger on the bobbin to keep it
from turning as you pull the thread À rmly to
the right and then to the left into the tension
spring (a) until it ‘‘clicks’’ into place.
4. Continue threading around (b) and to the
right of and then left into the thread cutter
(c). Replace the cover (1). Pull the thread to
the left to cut it (2).
Bobbin Winding
1. Place an empty bobbin on the bobbin
spindle at the front of the machine (the
mark “H” facing up). Push the bobbin
spindle down.
2. Place the large spool holder and a felt
pad under the spool on the auxiliary
spool pin.
3. Bring the thread into the thread tension
guide (a), and under thread guide (b)
then over thread guide (c) as illustrated.
NOTE: Depending on thread quality, take the
thread one or two turns around the bobbin thread
tension guide (a).
4. From above wind a few turns of thread
clockwise around the bobbin and into
the thread cutter (d).
5. Press the foot control. When the
bobbin is full, the winding will stop
automatically. Remove the bobbin and
cut off the thread. Bring the bobbin
spindle up.
12


Need help? Post your question in this forum.

Forumrules
1

Forum

husqvarna-platinum-775

Reset search

  • All of a sudden, my 775 won't do anything but a straight stitch. Obviously, I need my other stitches, too. What gives?! Submitted on 8-2-2017 at 05:15

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Platinum 775 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Platinum 775 in the language / languages: English as an attachment in your email.

The manual is 7,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna Platinum 775

Husqvarna Platinum 775 User Manual - German - 64 pages

Husqvarna Platinum 775 User Manual - Dutch - 64 pages

Husqvarna Platinum 775 User Manual - French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info