518135
9
Zoom out
Zoom in
Previous page
1/64
Next page
7
b
a
Learn your Platinum
Auxiliary Spool Pin
The auxiliary spool pin is used when wind-
ing a bobbin from a second spool of thread
or for a second spool when sewing with a
twin needle.
When using the auxiliary spool pin, place
the large spool holder and a felt pad under
the thread spool.
Threading the Upper Thread
When threading the upper thread, make
sure that the presser foot is raised and the
needle is in the up position.
Switch off the main switch.
1. Pull the spool pin out. Place the spool
on the spool pin with spool holder
(follow the instuctions on previous
page). The thread should reel clockwise.
Push the spool pin back in.
Hold the thread near the spool using
your right hand. Use your left hand to
bring the end of the thread in the direc-
tion of the arrows on the machine.
2. Bring the thread into the pre-tension
thread guide (a). Bring the thread down
and up between the thread tension discs
(b).
3. Continue threading in the direction indi-
cated by the arrows. Bring the thread
from the right when threading into the
slot on the take-up lever.
4. Pull the thread into the last guide just
above the needle.
5. The needle is threaded from front to
back (see needle threader for further
instructions).
6. Place the thread under the presser foot
and into the thread cutter on the left side
of the machine, pull it downwards to cut
it.
9


Need help? Post your question in this forum.

Forumrules
1

Forum

husqvarna-platinum-775

Reset search

  • All of a sudden, my 775 won't do anything but a straight stitch. Obviously, I need my other stitches, too. What gives?! Submitted on 8-2-2017 at 05:15

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Platinum 775 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Platinum 775 in the language / languages: English as an attachment in your email.

The manual is 7,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna Platinum 775

Husqvarna Platinum 775 User Manual - German - 64 pages

Husqvarna Platinum 775 User Manual - Dutch - 64 pages

Husqvarna Platinum 775 User Manual - French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info