518134
31
Zoom out
Zoom in
Previous page
1/44
Next page
29
Functions and GraphicDisplay
Programming
With Platinum 770 you can program
stitches and letters into combinations.
Save the programmed combinations
in the permanent memories. A pro-
grammed stitch combination that is
saved is retained in the memory even
when the machine is turned off.
PROG mode
When programming, the Sewing Advisor
is not active. Touch FUNC to activate the
PROG mode.
Memories
Touch M to select memory. The M and
the number that follows indicates the
active memory. There are four different
memories (M01 to M04). Each of the
four memories holds up to 55 stitches,
which means that you can program and
save up to 220 stitches and/or letters.
When activating PROG, the last used
memory is active. To save your pro-
grammed combination in a memory
other than the active, select the memory
number fi rst, before programming any
stitches. The programmed combination
will be saved automatically in memory.
Move the Cursor
The cursor on the GraphicDisplay is
under the active programming space.
Use the selection buttons to move the
cursor sideways.
Delete Stitches or Programs
If there is a stitch or letter combination
in the selected memory that is displayed
in the programming area, touch CLR to
clear the memory. To reload a deleted
program, touch CLR again before you
enter new stitches.
Note: When programming, you have
the possiblity to decrease the dis-
tance between two letters. Touch <
when the numbers/special characters menu
is active, to program short reverse stitches.
The more reverse stitches you program the
shorter the distance to the next entered
letter.
Note: Both the stop and fi x functions
can be programmed. The stop func-
tion is programmed when you want
to sew only one sequence of your program.
The fi x function can be used if you want to
x at the end or in the begining of a stitch
within the programmed combination.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Platinum 770 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Platinum 770 in the language / languages: English as an attachment in your email.

The manual is 3,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info