518131
20
Zoom out
Zoom in
Previous page
1/60
Next page
Functions and InfoDisplay
18
By touching the SPEED button you can
switch between the three speed ranges. If
you have reduced the speed manually, your
setting is retained and kept for all stitches
until your sewing machine is turned off.
Reverse
REVERSE is touched to sew in reverse. When
the button is released, your sewing machine
sews forwards. The longest reverse stitch
length is 3 mm.
For permanent reverse, touch the button
twice in quick succession before starting to
sew. The reverse sewing is indicated by an
icon on the InfoDisplay.
Your sewing machine sews in reverse until
you touch the button again.
Stitch length
When you select a stitch, your sewing
machine automatically sets the best stitch
length. The set length is visible on the Info-
Display above the stitch length buttons.
You can change the stitch length by touch-
ing either the (+) or (-) button.
Stitch width
The stitch width is set in the same way as
the stitch length. The set width is visible
on the InfoDisplay above the stitch width
button.
The width can be adjusted between 0 and 6
mm. If straight stitch is selected, the width
button is used to adjust the needle position.
The Touch Panel
Needle Stop Up/Down
(Platinum 755)
NEEDLE STOP POSITION is used to set the
needle stop position up or down.
Stop
STOP is used to conclude a stitch. Your
sewing machine fastens the thread and
stops automatically when a stitch or stitch
sequence has been completed. STOP is
cancelled when you touch the button again
or by selecting a new stitch. When STOP is
active, an icon is shown on the InfoDisplay.
The stop-function can be programmed.
Fix
FIX is used to tie off stitches. When the
button is touched, an icon is visible on
the InfoDisplay. By touching the button
again the function can be turned off. When
beginning to sew, your sewing machine
sews a few tie off stitches and goes on with
the selected stitch. Touch FIX while sewing
and your sewing machine sews a few tie off
stitches and stops automatically.
Speed (Platinum 755)
The maximum sewing speed is 900 rpm.
All stitches in your sewing machine have a
pre-set, recommended sewing speed. When
you select a stitch your sewing machine
automatically sets the correct sewing speed.
Platinum 715/735 Platinum 755
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Platinum 755 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Platinum 755 in the language / languages: English as an attachment in your email.

The manual is 4,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna Platinum 755

Husqvarna Platinum 755 User Manual - German - 60 pages

Husqvarna Platinum 755 User Manual - Dutch - 60 pages

Husqvarna Platinum 755 User Manual - French - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info