518129
21
Zoom out
Zoom in
Previous page
1/60
Next page
Functions and InfoDisplay
19
Memory (Platinum 755)
Your sewing machine has two different
memories where programmed combinations
can be saved. Each memory holds up to
30 stitches or letters. The button is used to
advance to the memory required in PROG or
REP. The active memory number is shown in
the lower right corner of the InfoDisplay.
CLR
Touch this button in PROG to delete the
whole or a part of a program (see page 26).
When a program in a memory has been
deleted, the stitch number is cleared on the
InfoDisplay.
Stitch Menus
Touch the stitch menu button to step
between the stitch menus. The currently
selected menu is indicated in the Overview
Window.
Platinum 755 has 35 utility stitches (menu
1) and 70 decorative stitches (menu 2-3).
Platinum 735 has 21 utility stitches (menu
1) and 42 decorative stitches (menu 2-3).
Platinum 715 has 21 utility stitches (menu
1) and 21 decorative stitches (menu 2).
The utility stitches are visible on the Touch
Panel and the decorative stitches are pic-
tured inside the lid.
Alphabet Menu (Platinum 755)
The Platinum 755 has an alphabet - Outline
Block. Touch the alphabet menu button
and “A..” is shown on the InfoDisplay.
Mirror Side to Side
Touch this button to mirror the selected
stitch side to side. If this button is touched
when straight stitch with left needle posi-
tion is selected, the needle position is
changed from left to right. If touched in
REP, the whole stitch combination is mir-
rored (see page 26).
Mirror End to End (Platinum 755)
Touch this button to mirror the selected
stitch end to end. If touched in REP, the
whole stitch combination is mirrored (see
page 26). If a STOP is programmed at the
end of a combination, and the combination
is mirrored end to end, the STOP will be
placed at the beginning instead.
FUNC
Touch this button to step between the dif-
ferent modes on your sewing machine.
There are three different modes; NORM,
PROG and REP. The NORM mode (normal
sewing mode) is always active when the
machine is turned on. Touch once to acti-
vate the PROG mode (used when program-
ming), then touch again to enter the REP
mode that is used to sew a programmed
combination. Touch again to return to
NORM mode. The active mode is indicated
on the InfoDisplay.
Arrow Buttons
These buttons are used to advance or
return within a programmed sequence.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Platinum 715 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Platinum 715 in the language / languages: English as an attachment in your email.

The manual is 4,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna Platinum 715

Husqvarna Platinum 715 User Manual - German - 60 pages

Husqvarna Platinum 715 User Manual - Dutch - 60 pages

Husqvarna Platinum 715 User Manual - French - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info