518129
12
Zoom out
Zoom in
Previous page
1/60
Next page
a
b
c
d
1
2
10 15
b
a
b
c
1.
2.
3.
4.
Learn your Platinum
Placing the Bobbin in the Machine
Turn off the main switch.
1 Remove the bobbin cover by sliding it
towards you.
2 Place the bobbin in the bobbin case with the
markafacing up and the thread to the left
of the bobbin. The bobbin will then rotate
counter clockwise when pulling out the
thread.
3 Place your À nger on the bobbin to keep it
from turning as you pull the thread À rmly to
the right and then to the left into the tension
spring (a) until it ‘‘clicks’’ into place.
4 Continue threading around (b) and to the
right of and then left into the thread cutter
(c). Replace the cover (1). Pull the thread to
the left to cut it (2).
Bobbin Winding
1 Place an empty bobbin on the bobbin
spindle at the front of the machine (the
markafacing up). Push the bobbin
spindle down.
2 Place the large spool holder and a felt
pad under the spool on the auxilary
spool pin.
3 Bring the thread into the thread tension
guide (a), and under thread guide (b)
then over thread guide (c) as illustrated.
Note: Depending on thread quality, take the
thread one or two turns around the bobbin thread
tension guide (a).
4 From above wind a few turns of thread
clockwise around the bobbin and into
the thread cutter (d).
5 Press the foot control. When the
bobbin is full, the winding will stop
automatically. Remove the bobbin and
cut off the thread. Bring the bobbin
spindle up.
!
10
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Platinum 715 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Platinum 715 in the language / languages: English as an attachment in your email.

The manual is 4,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna Platinum 715

Husqvarna Platinum 715 User Manual - German - 60 pages

Husqvarna Platinum 715 User Manual - Dutch - 60 pages

Husqvarna Platinum 715 User Manual - French - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info