477554
37
Zoom out
Zoom in
Previous page
1/208
Next page
To do a check of the oil level in the
hydraulic system
1. Tilt the seat forward.
2. Clean the area around the oil cap with a dry cloth.
3. Remove the oil cap and examine the hydraulic oil
level. Correct level is 40–60 mm from the top of the
strainer.
4. If the oil level is too low, fill with the type of oil given
in
Technical data on page 44
.
To do a check the oil level in the
bevel gear of the cutting deck
1. Park the product on a level surface.
2. Lower the cutting deck to mow position.
3. Put a clean metal rod through the oil fill plug. The
metal rod must be a minimum of 100 mm long and
maximum 3 mm in diameter.
4. Lower the metal rod to the bottom of the gear
housing.
5. Pull the dipstick out and read the oil level.
6. Measure the part of the metal rod that is have oil on
it. There must be oil on 78-82 mm of the metal rod.
7. Fill with hydraulic oil if the oil level is less than 78
mm of the metal rod. Refer to
Technical data on
page 44
for recommended oil.
To replace the oil in the bevel gear
of the cutting deck
1. Remove the cutting deck. Refer to
To remove the
cutting deck on page 14
.
2. Put the cutting deck on its front edge and drain the
oil through the oil fill plug.
3. Let the oil run out into a container.
4. Fill with 80 ml new hydraulic oil as given in
Technical
data on page 44
.
To do a check of the coolant level
1. Park the product on level ground and stop the
engine.
2. Open the coolant cap.
3. Look down in the coolant tank.
4. Fill the coolant tank if you can not see the coolant
through the opening of the coolant tank. Refer to
Technical data on page 44
.
740 - 004 -
37
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna P525D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna P525D in the language / languages: English, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 18,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna P525D

Husqvarna P525D User Manual - German - 208 pages

Husqvarna P525D User Manual - German - 56 pages

Husqvarna P525D User Manual - Dutch - 208 pages

Husqvarna P525D User Manual - Dutch - 56 pages

Husqvarna P525D User Manual - French - 208 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info