477554
10
Zoom out
Zoom in
Previous page
1/208
Next page
cannot fully prevent injury but it decreases the
degree of injury if an accident does occur. Let your
dealer help you select the right equipment.
Always wear approved hearing protection. Long term
exposure to noise can result in permanent hearing
impairment.
Always wear protective shoes or protective boots.
Steel toes are recommended. Do not use the
product barefoot.
Wear gloves when necessary, for example when you
attach, examine or clean the cutting equipment.
Do not wear loose-fitting clothing, jewelry or other
items that can get caught in moving parts.
Keep first aid equipment and fire extinguisher close
at hand.
Safety devices on the product
WARNING: Read the warning instructions
that follow before you use the product.
Do not use a product with defective safety devices.
Do a check of the safety devices regularly. If the
safety devices are defective, speak to your
Husqvarna service agent.
Do not make modifications on safety devices. Do not
use the product if protective plates, protective
covers, safety switches or other protective devices
are not attached or are defective.
Roll Over Protection Structure (ROPS)
ROPS is a protective frame that decreases the risk of
injury if the product overturns. Use the ROPS and the
safety belt when you operate the product on slopes.
Safety belt
The safety belt prevents injury if accidents occur or the
product overturns. Use the safety belt only when the
ROPS is engaged. Make sure that the seat belt is
correctly attached and not damaged.
To do a check of the ignition lock
Start and stop the engine to do a check of the
ignition lock. See
To start the engine on page 19
and
To stop the engine on page 22
.
Make sure that the engine starts when you turn the
ignition key to START.
Make sure that the engine stops immediately when
you turn the ignition key to OFF.
To do a check of the operation conditions
The operation conditions are as follows:
The engine can only be started when the drive of the
blades is disengaged.
The engine can only be started when the parking
brake is applied.
The drive of the blades can only operate when the
operator sits in the seat.
Do a check of the operation conditions daily.
1. Try to start the engine with the drive of the blades
engaged. If the operation conditions works, the
engine does not start.
2. Try to start the engine without the parking brake
applied. If the operation conditions works, the engine
does not start.
3. Start the engine, engage the drive on the blades and
lift from the seat. If the operation conditions works,
the blades in the cutting deck stop.
To do a check of the speed limiter
Release the forward pedal to brake.
For more brake power, press the reverse pedal.
Make sure that the forward and reverse pedals are
not blocked and can be operated freely.
Make sure that the product brakes when the forward
pedal is released.
Parking brake
WARNING:
If the parking brake does not
work, the product can start to move and
cause injury or damage. Make sure that the
parking brake is regularly examined and
adjusted.
See
To do a check of the parking brake on page 30
.
Muffler
The muffler keeps the noise levels to a minimum and
sends the exhaust fumes away from the operator.
Do not use the product if the muffler is missing or
defective. A defective muffler increases the noise level
and the risk of fire.
WARNING:
The muffler becomes very hot
during and after use and when the engine
operates at idle speed. Be careful near
flammable materials and/or fumes to prevent
fire.
10 740 - 004 -
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna P525D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna P525D in the language / languages: English, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 18,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna P525D

Husqvarna P525D User Manual - German - 208 pages

Husqvarna P525D User Manual - German - 56 pages

Husqvarna P525D User Manual - Dutch - 208 pages

Husqvarna P525D User Manual - Dutch - 56 pages

Husqvarna P525D User Manual - French - 208 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info