477553
36
Zoom out
Zoom in
Previous page
1/52
Next page
36 – English
Lubrication
Changing the oil filter
The oil filter is located on the right side of the engine.
Open the engine cover.
Turn the old oil filter anti-clockwise to remove. If
necessary, use a filter remover.
Clean the oil filter bracket.
Lightly lubricate the rubber seal on the new oil filter using
new oil.
Fit the oil filter by turning clockwise. Turn by hand until the
rubber seal is seated. Now tighten a further half turn.
Start the engine and let it idle for about 3 minutes. Now
stop it and check for signs of leakage.
Check the engine oil level and top up if necessary.
Check the hydraulic system oil level
The oil and filter should be changed by an authorised service
representative, as described in the Workshop Manual. Work
on the system entails particular demands on cleanliness and
the system must be vented before the machine is used.
Fold up the seat.
Remove the filler cap. The level should be 40-60 mm from
the strainer top.
Refill as required with fully synthetic 10W/50 API SM oil or
better
Check the oil level in the
transmission gearboxes
Use the oil dipstick to check that there is oil in the
transmission.
The oil level should be between the markings on the
dipstick.
Refill as required with fully synthetic 10W/50 API SM oil or
better
Knobs for setting the cutting height
Lubricate front and rear knobs with oil.
Driver seat
Fold up the seat.
Lubricate the lever for longitudinal adjustment with oil.
Lubricate the longitudinal adjustment runners with grease.
Pull the seat back and forth and lubricate on both sides.
!
WARNING! Engine oil can be very hot if it is
drained directly after stopping the engine.
Allow the engine to cool somewhat first.
IMPORTANT!
Used engine oil and transmission oil is hazardous to health
and must not be disposed of in the ground or out of doors.
Replaced filters must be handed in to the workshop or other
allotted place for disposal.
Avoid skin contact; wash with soap and water in case of
spills.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna P520D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna P520D in the language / languages: English as an attachment in your email.

The manual is 10,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna P520D

Husqvarna P520D User Manual - English - 208 pages

Husqvarna P520D User Manual - German - 208 pages

Husqvarna P520D User Manual - German - 56 pages

Husqvarna P520D User Manual - Dutch - 208 pages

Husqvarna P520D User Manual - Dutch - 56 pages

Husqvarna P520D User Manual - French - 208 pages

Husqvarna P520D User Manual - Italian, Portuguese, Spanish - 208 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info