733796
59
Zoom out
Zoom in
Previous page
1/72
Next page
Symbol Name Shows on the
display Cause / Action
Hybrid mode dis-
abled
The symbol
shows.
Speak to your Husqvarna servicing dealer.
12 V battery level
indicator
The symbol
shows.
Low voltage. Refer to
To charge the 12 V battery on
page 55
.
48 V batteries
level indicator
The symbol is
white. The batteries level is in the correct range.
The symbol is
yellow.
The batteries level is low.
The symbol is
red.
The batteries are empty.
Battery tempera-
ture indicator
The symbol
shows.
The 48 V batteries are too cold.
48 V batteries
overcharged
The symbol
shows.
The 48 V batteries are fully charged and no more charge
is accepted. For example when you go down a slope
when the 48 V batteries are fully charged. Start the hy-
brid drive to decrease the batteries level.
48 V batteries re-
serve
The symbol
shows.
The hybrid mode is disabled and the 48 V batteries re-
serve is used (<20%). The 48 V batteries can only be
charged with the power supply. Do not use the product
and speak to your Husqvarna servicing dealer if this
symbol shows.
PTO button indi-
cator
The symbol
shows.
The PTO button is engaged. Refer to
PTO (Power Take-
Off) button on page 9
.
The symbol is
yellow.
Incorrect start or stop procedure. Refer to
To stop the
product on page 34
.
PTO button indi-
cator
The symbol
shows.
The PTO button is engaged but there is no drive to the
blades or other equipment. Refer to
PTO (Power Take-
Off) button on page 9
.
Parking brake in-
dicator
The symbol
shows (green). The automatic parking brake is engaged.
Parking brake in-
dicator
The symbol
shows (red).
The manual parking brake is engaged.
OPC indicator
The symbol is
yellow.
The operator presence control (OPC) is engaged. For
example if the operator lifts from the seat. Refer to
Oper-
ator presence control (OPC) on page 9
.
The symbol is
red.
The seat microswitch is engaged and the PTO button is
engaged. The drive to the blades or other equipment
stops automatically. Refer to
Safety circuit on page 21
.
Service indicator The symbol
shows.
Servicing is necessary. Speak to your Husqvarna servic-
ing dealer.
1262 - 004 - 04.06.2020 59
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna P 535HX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna P 535HX in the language / languages: English as an attachment in your email.

The manual is 13,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info