733796
50
Zoom out
Zoom in
Previous page
1/72
Next page
3. Remove the side hose (A) from the coupling.
A
B
4. Make sure that the opening in the coupling is closed
or attach a hose to the coupling and hold it up.
5. Open the lid (B).
6. Use a funnel to fill the hydraulic oil into the opening.
Fill until the level is at the mark in the middle of the
sight glass.
7. Install the lid, the side hose and the covers in
opposite sequence.
To drain the hydraulic system
1. Remove the service lid. Refer to
To remove the
sevice lid on page 44
2. Remove the right side cover. Refer to
To remove the
right side cover on page 45
.
3. Open the lid for the hydraulic system. Refer to
To fill
the hydraulic system on page 49
.
4. Remove the drain plug and drain the hydraulic oil.
5. Install the lid, drain plug and covers in opposite
sequence.
To replace the hydraulic oil filter
1. Drain the hydraulic system. Refer to
To drain the
hydraulic system on page 50
.
2. Turn the hydraulic oil filter counterclockwise to
remove it.
3. Install a new hydraulic oil filter in opposite sequence
and fill the hydraulic system. Refer to
To fill the
hydraulic system on page 49
.
To adjust the PTO-belts
1. Release the lock nut (A).
2. Tighten the adjustment screw (B) until the sleeve is
against the frame bracket (C).
3. Hold the adjustment screw (B) and tighten the lock
nut (A).
A
C
B
50 1262 - 004 - 04.06.2020
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna P 535HX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna P 535HX in the language / languages: English as an attachment in your email.

The manual is 13,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info