733796
8
Zoom out
Zoom in
Previous page
1/72
Next page
PTO rpm drops and can cause decreased
performance or an engine stop.
(D): The PTO speed in rpm.
Total operation time and hour meter
The total operation time (A) of the engine shows on the
display when the product is in idle position. The hour
meter (B) shows the operation time in hours and
minutes when hybrid drive is on. The trip meter is
automatically set to 0 when the engine is off for more
than 6 hours.
A
B
Hybrid system
During operation, the 48 V batteries are charged by the
generator when the engine is on. The 48 V batteries are
also charged by the wheel motors through regenerative
braking. The engine also charges the 12 V battery. The
state of charge of the 48 V batteries shows on the
display. You can connect the power supply to the
product to increase the charge of the the 48 V batteries
during stops. Refer to
Display guides and gauges on
page 7
.
Mower control module
The product has a mower control module that gives the
operator information about the product. The information
shows on the display on the instrument panel. Refer to
Display overview on page 7
.
The mower control module enables the servicing dealer
to connect to the product when they do servicing.
Vehicle control unit (VCU)
The VCU controls the different units in the 48 V system,
such as motors and batteries.
Cooling fans for the electrical system
The cooling fan for the 48 V batteries prevents the
temperature in the 48 V batteries to become too hot.
Note: The cooling fan for the 48 V batteries can continue
to operate for until an hour after the power key is set to
OFF.
The cooling fan for the motor control unit for the
hydraulic system operates when the power key is in the
ON position. You find the cooling fan for the motor
control unit for the hydraulic system directly above the
motor control unit for the hydraulic system.
Refer to
Electrical system overview 48 V on page 4
to
see where the cooling fan for the 48 V batteries and the
motor control unit for the hydraulic system is on the
product.
Headlights
The product has a work light and a high beam light.
Push the power switch to position (A) to make the lights
go off. Push the power switch to position (B) to make the
work light come on. Push the power switch to position
(C) to also make the high beam light come on.
AC
B
The work light stays on for 3 minutes after the power key
is set to STOP. When the headlights are on, the display
shows the headlight symbol. Refer to
Display overview
on page 7
.
Power outlet
The voltage of the power outlet is 12 V. The power outlet
has a fuse. Refer to
Fuse overview on page 6
.
Set the power outlet to ON or OFF with the power switch
found on the control panel.
81262 - 004 - 04.06.2020
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna P 535HX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna P 535HX in the language / languages: English as an attachment in your email.

The manual is 13,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info