595367
14
Zoom out
Zoom in
Previous page
1/48
Next page
14 – English
ASSEMBLING AND ADJUSTMENTS
Fitting the cutting head
1 Ride the machine to the cutting deck.
2 Lower the lift arms to the cutting deck attachment points.
3 Activate the parking brake and turn off the engine.
4 Insert the bolts for the link joints and the pins on both sides
of the cutting deck.
5 Fit the universal drive shaft to the cutting unit. The
propeller shaft is marked with an arrow indicating the
direction in which it is to be connected to the power take-
off on the machine. Slide back the ring to release the quick
coupling and the universal drive shaft can be pushed onto
the shaft journal.
6 Secure the front locking chain to the universal joint cover
around the cross pipe.
7 Make sure the rubber casing is folded over the front
universal joint.
8 Remove the service hatch.
9 For more information, see 'Removing the ride-on mower
covers'.
10 Couple the rear of the propeller shaft to the power take-off
on the machine.
11 Fit the locking chain to the universal joint cover around the
lifting beam.
12 Refit the service hatch.
13 Start the engine and lift the cutting unit halfway up.
14 Turn off the motor.
15 Fit the lifting eyes which are attached to the lift arms. Pull
out the catch and press in the lifting eye. There is one for
each lift arm.
16 Check and adjust the tilt angle of the cutting unit. For more
information, see 'Cutting Height and Tilt Angle
Adjustment'.
!
WARNING! If the help function is engaged,
the lift arms will move with great force if
someone releases the lifting lever. Observe
caution to avoid trapping your hand.
Risk of crush injuries.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna P 525D - 2015 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna P 525D - 2015 in the language / languages: English as an attachment in your email.

The manual is 12,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna P 525D - 2015

Husqvarna P 525D - 2015 User Manual - German - 48 pages

Husqvarna P 525D - 2015 User Manual - Dutch - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info