595368
15
Zoom out
Zoom in
Previous page
1/48
Next page
English – 15
ASSEMBLING AND ADJUSTMENTS
Fitting the cutting head
- Combi 132 X, Combi 155 X
17 Follow the instructions for 'Assembling the Cutting Deck'
steps 1-16.
18 Pull the hydraulic hoses from the cutting deck through the
eyelet.
19 Connect the hydraulic hoses from the cutting deck to the
quick couplings on the machine.
20 Make sure hydraulic hoses are coupled correctly by
adjusting the cutting height with the cutting height control
on the machine. For more information, see 'Cutting Height
- Combi 132 X, Combi 155X'.
21 Select a function with the cutting height control (raise,
lower) with the location of the hydraulic hoses in the quick
couplings on the machine. Switch the raise and lowering
function by changing the location of the hydraulic hoses.
Removing the cutting unit
1 Place the machine on a flat surface and apply the parking
brake.
2 Disconnect the hydraulic hoses from the quick
connections on the machine.
(Combi 132 X, Combi 155 X)
3 Raise the cutting unit halfway.
4 Turn off the motor.
5 Remove the lifting eyes from the cutting unit.
6 Start the engine and lower the cutting unit to the lowest
position. The cutting unit now hangs free at the back.
7 Turn off the motor.
8 Remove the service hatch.
9 Slide back the ring to release the quick connector and to
be able to pull the propeller shaft from the shaft journal.
Remove the universal drive shaft completely. Lift off the
lock chains.
10 Remove the pins from the shafts and remove the shafts
from the link joints.
!
WARNING! Never leave the universal drive
shaft of the machine with one end loose. If
the engine is started, damage can occur.
!
WARNING! If the help function is connected,
the lift arms move with great force when the
pins are loosened. Observe caution to avoid
trapping your hand.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna P 520D - 2015 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna P 520D - 2015 in the language / languages: English as an attachment in your email.

The manual is 12,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna P 520D - 2015

Husqvarna P 520D - 2015 User Manual - German - 48 pages

Husqvarna P 520D - 2015 User Manual - Dutch - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info