609737
43
Zoom out
Zoom in
Previous page
1/68
Next page
Operating your Opal
670/690Q sewing machine – 41
SET MENU
You can change the pre-set machine settings and make manual adjustments to the automatic functions in the SET Menu. Open
the menu by touching the SET Menu icon (A). To activate a function, touch to place an X in the box. To cancel the function,
touch again to leave the box empty. For some functions, a pop-up window opens for further selection. Touch the SET Menu icon
again to close the SET Menu.
Presser foot pressure (690Q)
Use the up/down arrow buttons if you want to adjust the
presser foot pressure for the selected stitch. The value can
be adjusted between 0 and 8.5 in steps of 0.5. Your manual
setting will be cancelled when you select another stitch or turn
off the machine.
Note: When you save a stitch or program in My Stitches the setting of
the presser foot pressure is also saved.
Pivot height (690Q)
If Free Motion is activated you will be able to set the height
of the presser foot pivot position. The pivot position can be
raised or lowered in 15 steps by pressing the left/right arrow
buttons.
Skipped stitches can occur if your fabric moves up and down
with the needle as you are stitching. Lowering the pivot height
will reduce the space between the presser foot and the fabric and
eliminate the skipped stitches.
Note: Be careful not to reduce the pivot height too much. The fabric must
still move freely under the presser foot.
Sensor Foot auto (690Q)
Press the OK button to turn on or off the automatic pivot
function for lifting the presser foot for example when stopping
with the needle down. The setting will go back to default when
the machine is turned off.
Twin Needle
If you are using a twin needle, set the size of the needle to
limit the width of all stitches and prevent needle breakage.
Touch the twin needle function to open a pop-up window.
Touch the box next to the twin needle size you are using to
make your selection.
Your setting will be saved also when the machine is turned off.
A pop-up message reminds you of the setting when you turn
on the machine. Close the pop-up message by pressing OK.
Note: You cannot set the twin needle size if the Stitch Width Safety
is on, or turn on the Stitch Width Safety if the machine is set for twin
needle.
Stitch Width Safety
Touch to turn on the Stitch Width Safety when using a straight
stitch needle plate or a straight stitch presser foot (optional
accessories).
The stitch width will be limited to zero for all stitches to
prevent damage to the needle, presser foot and needle plate.
This setting is saved when the machine is turned off. A pop-
up message reminds you of the setting when you turn on the
machine.
Free Motion Floating* (690Q)
To sew in free motion with the included Embroidery/
Darning Foot R or with any optional Free Motion Floating
presser foot, set the machine in Free Motion Floating Mode.
In Sewing Mode the drop feed teeth recommendation will be
activated. The setting remains when the machine is turned off.
A pop-up reminds you of the setting when you turn on the
machine. Close the pop-up message by pressing OK.
Note: You cannot set the machine in Free Motion Floating Mode if Free
Motion Spring Action is activated or vice versa.
Free Motion Spring Action** (690Q)
If you are using any of the optional Free Motion Spring
Action presser feet, you need to set the machine in Free
Motion Spring Action Mode. In Sewing Mode the drop feed
teeth recommendation will be activated. The setting remains
when the machine is turned off. A pop-up message reminds
you of the setting when you turn on the machine. Close the
pop-up message by pressing OK.
*Free Motion Floating
When you are sewing free motion at low speed the
foot will raise and lower with each stitch to hold the
fabric on the stitch plate while the stitch is being
formed. When sewing in high speed, the foot oats
over the fabric while sewing. The feed teeth must
be lowered and the fabric is moved manually. All
stitches can be sewn in Free Motion Mode.
**Free Motion Spring Action
The Free Motion Spring Action presser feet follows
the up and down movement of the needle with
help of the spring and the arm on the presser foot.
The feed teeth must be lowered and the fabric is
moved manually. It is recommended to turn on the
Stitch Width Safety for the presser feet that are only
intended for straight stitch sewing.
A
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Opal 690Q at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Opal 690Q in the language / languages: English as an attachment in your email.

The manual is 5,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna Opal 690Q

Husqvarna Opal 690Q User Manual - German - 35 pages

Husqvarna Opal 690Q User Manual - Dutch - 35 pages

Husqvarna Opal 690Q User Manual - French - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info