510452
50
Zoom out
Zoom in
Previous page
1/64
Next page
50 – Sewing
SEWING BUTTONHOLES
The buttonholes in your sewing machine are specially adjusted for different kinds of fabric and garments. Learn about different
buttonholes and when to use them by studying the stitch table in the overview chapter.
The Exclusive SEWING ADVISOR™ feature will select the best buttonhole and stitch settings for your fabric. Fabric should
be interfaced and/or stabilized where buttonholes are to be sewn.
B
A
Automatic One-Step Sensor Buttonholes
When you select a buttonhole stitch with the Sensor One-
Step Buttonhole Foot connected, you will be able to set the
size of the button on the GraphicDisplay/TouchScreen.
Set the size of the button by pressing the (up and down)
Navigator Arrows (A) (650) or by touching – or + (B) (670).
When sewing, your sewing machine automatically sews the
buttonhole long enough to t the selected button size. Because
the Sensor One-Step Buttonhole Foot measures as it sews,
every buttonhole will be the same size.
Note: The buttonhole size will vary with the thickness and style of your
button. Always stitch a sample buttonhole on scrap fabric rst.
1. Attach the Sensor One-Step Buttonhole Foot.
2. Plug the cord into the socket above the needle area.
3. Measure the button diameter using the button measuring
chart on the front of the machine.
4. Set the button size on the GraphicDisplay/TouchScreen.
The size can be set between 0-50 mm.
5. Place the fabric and stabilizer under the Sensor One-Step
Buttonhole Foot. The measurement wheel can be raised
by lifting it, which makes it easier to place the fabric under
the presser foot. Use the markings on the left toe of the
Sensor One-Step Buttonhole Foot to position the garment
edge. Place the edge of the garment at the middle mark to
have 5/8’’ (15 mm) from the edge to the buttonhole.
6. Before sewing, line up the white area on the side of the red
wheel with the white marking line on the foot.
7. Lower the presser foot. Step on the foot control. A straight
stitch is sewn away from you stabilizing the left buttonhole
column, then the satin column is sewn toward you. This
is repeated for the right column. The bartacks are also
sewn automatically. The arrows on the GraphicDisplay/
TouchScreen will show when each part of the buttonhole
is sewn and in what direction. Keep the foot control
depressed until the buttonhole is nished. The machine
will stop automatically when the buttonhole is completed.
650: Set the size of the button by using the up and
down Navigator Arrows (A).
670: Set the size of the button by touching the
+ and – icons (B).
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna OPAL 670 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna OPAL 670 in the language / languages: English as an attachment in your email.

The manual is 8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna OPAL 670

Husqvarna OPAL 670 User Manual - German - 64 pages

Husqvarna OPAL 670 User Manual - Dutch - 35 pages

Husqvarna OPAL 670 User Manual - French - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info