510453

Husqvarna OPAL 650 Manual

49
Zoom out
Zoom in
Previous page
1/64
Next page
7
Jeans Hem – Woven Heavy and Hem
Sewing – 49
HEM
The Hem technique on your Exclusive SEWING ADVISOR™ feature will select the visible or topstitch hem that is best for
your fabric weight and type. For woven fabric and leather and vinyl, a straight stitch is selected. For stretch fabrics, stitches that
stretch are selected.
Flatlock stitch to hem stretch
fabric and for belt loops.
Jeans Hem
When sewing over seams in extra heavy fabric or a jeans hem,
the presser foot may tip as it rides over the seam. Use the
multipurpose tool (optional accessory, part number 4131056-01)
to balance the height of the presser foot as you sew.
Press Needle Up/Down to select the needle down position.
Begin sewing the bottom hem at or near the center back. As
you near the side seam, stop sewing. Your machine stops with
the needle in the fabric. Raise the presser foot and insert the
multipurpose tool from behind.
Both sides of the multipurpose tool are raised. Use the side
which corresponds closest to the thickness of the seam. Lower
the presser foot and continue sewing slowly over the thick
seam.
Stop sewing again just in front of the seam with the needle in
the fabric. Remove the multipurpose tool and re-insert it under
the presser foot from the front.
Sew a few stitches until the whole presser foot has passed the
seam and is resting on the multipurpose tool. Stop sewing
once again. The needle is in the fabric. Raise the presser foot
and remove the multipurpose tool. Continue sewing the hem.
Tip: When sewing in heavy denim, use a special Denim Needle designed
to penetrate tightly woven fabrics. These are available as optional
accessories, please consult the HUSQVARNA VIKING Accessory
User’s Guide, available at www.husqvarnaviking.com.
Stretch Hem
Select Stretch Medium and Hem and the Exclusive SEWING
ADVISOR™ feature selects a fl atlock stitch. Follow other
recommendations given on the GraphicDisplay/TouchScreen.
Fold a hem to the wrong side and stitch with fl atlock stitch
from the right side. Trim away excess fabric.
Stretch Medium and Hem
… 49 …


Need help? Post your question in this forum.

Forumrules
1

Forum

husqvarna-opal-650

Reset search

  • MY FOOT CONTROL DOES NOT WORK. i HAVE RE-PLUGGED IT IN, TURNED MACHINE ON/OFF, BUT NOTHING WORKS. i NEED TO USE THE START/STOP SWITCH TO SEW. Submitted on 18-11-2022 at 20:55

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna OPAL 650 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna OPAL 650 in the language / languages: English as an attachment in your email.

The manual is 8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna OPAL 650

Husqvarna OPAL 650 User Manual - German - 64 pages

Husqvarna OPAL 650 User Manual - Dutch - 35 pages

Husqvarna OPAL 650 User Manual - French - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info