518127
28
Zoom out
Zoom in
Previous page
1/44
Next page
26
Getting started
Getting started to sew
Before you start to sew, try test stitching
with the same thread and with the same type
of fabric.
1. Raise the presser foot and place the
fabric under the foot.
2. Lower the presser foot and pull the
threads towards the back.
3. Set the speed control slide to slow until
you get used to the speed. Press down
on the foot control.
4. Gently guide the fabric along the seam
guide letting the fabric feed by itself.
5. Check the sewing result and adjust the
needle thread tension if needed.
Note: To lock the beginning of the seam, sew a
few stitches forward, then sew a few stitches in
reverse, then sew forward again. You can also pull
the bobbin thread to bring the needle thread to the
wrong side of the fabric. Tie the threads together.
Trim the remaining threads.
Getting started
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna MEGA QUILTER 1200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna MEGA QUILTER 1200 in the language / languages: English as an attachment in your email.

The manual is 0,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info