Manual Husqvarna MEGA QUILTER 1200 (page 17 of 44) (English)

518127

Zoom out

Zoom in

1/44

Operating your MEGA QUILTER™

Attaching the darning plate

If you want to feed the fabric free motion, for

instance when stippling, you should use the

darning plate (A) that has been provided with your

MEGA QUILTER™.

To attach the darning plate you should start by

raising the presser foot lifter. Raise the needle to

its highest position by pressing the Needle Up/

Down button twice.

Switch off the main switch and

unplug the machine.

Remove the two set screws and remove the

standard needle plate. Put the darning plate in

place and secure it with the two set screws.

Placing a thread spool on the

spool pin

Place a spool of thread on the spool pin and put

a spool cap firmly against the spool. The thread

should come off the spool as shown in the

picture.

Placing a thread cone on the

spool pin

If you are using a large thread cone, use a spool

holder to hold the cone in place. Put the spool

holder (B) on the spool pin, then place the thread

cone on the spool holder.

Note: If the cone is wobbly when sewing, cover the thread

cone with the net that comes with the machine.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna MEGA QUILTER 1200 in the language / languages: English as an attachment in your email.

The manual is 0,91 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Husqvarna MEGA QUILTER 1200 Manual

Product: