610257
46
Zoom out
Zoom in
Previous page
1/52
Next page
Instruction book/Manual de instrucciones Lily 535
46
Fault-finding
Always start by checking the needle
Always start with a new needle as soon as
you discover that a stitch is not what you
expected. Test sew on a scrap of the fabric
you are sewing. Check that you have chosen
the correct needle and see that it is correctly
inserted. See page 17.
Unattractive stitches
The thread tension is not correct. See page14.
Make sure that the thread is not catching. Cer-
tain thread spools are unsuitable for spooling
from the horizontal spool pin. Try instead
with the vertical spool pin. The machine may
be incorrectly threaded. Be sure to place
spool holders correctly.
The correct threading is shown on page 11.
Wrong bobbin thread. It should be of the
same thickness as the upper thread.
The needle breaks
The needle can strike against stitch plate and
break. Change the needle. See page 17.
The upper thread breaks
Check the thread spool to see that it has not
caught in any way.
The needle eye may have sharp edges which
cut the thread. If so, change the needle. See
page 17.
The upper thread is incorrectly threaded. See
page 11. The upper thread may have too
much tension. Refer to page 15.
The hole in the stitch plate may be chipped
and have sharp edges. We recommend that
you replace it.
The bobbin thread breaks
The bobbin thread may be incorrectly
threaded. See page 14.
The stitch plate hole is damaged. See "Upper
thread breaks".
Irregular thread tension
This may be due to poor quality thread.
When sewing with cotton thread, increase the
thread tension.
The bobbin thread breaks
The bobbin thread may be incorrectly
threaded. See page 14. The stitch plate hole is
damaged. See "Upper thread breaks".
Irregular thread tension
This may be due to poor quality thread.
When sewing with cotton thread, increase the
thread tension.
Posibles averías
Controlar la aguja
Cuando alguna vez una costura no sea satis-
factoria, comprobar con una aguja nueva en
un trozo de tela. Controlar que se haya elegi-
do la aguja correcta y asegurarse de que la
aguja sea introducida hasta su tope y que el
tornillo está apretado correctamente, véa pág.
17.
Puntadas falsas
La tensión del hilo no es correcta, véa pág.
15. Asegúrarse que el hilo no está bloquea-
do. Ciertos porta-carretes no son adecuados
para el devanado desde porta-carretes hori-
zontales. Por lo tanto, comprobar con un por-
ta-carrete vertical. El enhebrado no es correc-
to, verificar según la pág. 11. Hilo inferior in-
adecuado. Este debe ser igual que el superior.
Rotura de la aguja
La aguja se puede romper al tropezar contra
la placa de aguja. Cambiar la aguja, véa pág.
17.
Rotura del hilo superior
Examinar el carrete del hilo y verificar si el
hilo se ha enganchado en alguna parte. Pod-
ría ser que el agujero de la aguja no estuviera
lo suficiemente bien pulido. Cambiar la aguja,
véa pág. 17.
El hilo superior está mal enhebrado, véa pág.
11. La tensión del hilo superior es demasiado
fuerte. Ver la ”Tensión del hilo”, pág. 15.
El agujero de la placa de la aguja se ha
dañado por los continuos pinchazos de la
aguja. Lo mejor es cambiar la placa de aguja.
Rotura del hilo inferior
El hilo inferior está mal enhebrado, véa pág.
14. Se ha dañado el agujero de la placa de
aguja, ver arriba.
Tensión irregular del hilo
Puede ser a causa de la deficiente calidad del
hilo. Al coser con un hilo de algodón, aumen-
ar la tensión del hilo. El hilo inferior está mal
enhebrado, véa pag. 13.
Bobinado irregular del hilo
La máquina no está correctamente enhebrada
para el bobinado, ver la pág. 14.
La tela se frunce
La tensión del hilo superior es demasiado
fuerte. Tensión correcta del hilo, véa pág. 15.
Utilice el prensatelas indicado en la pantalla.
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Lily 535 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Lily 535 in the language / languages: English as an attachment in your email.

The manual is 0,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info