610257
33
Zoom out
Zoom in
Previous page
1/52
Next page
Instruction book/Manual de instrucciones Lily 535
33
Three-step zigzag
Overcasting
Three-step zigzag, No 04 is
suitable for overcasting most fabrics.
Trim the edges of the fabric before
overcasting.
Make sure that the needle sews over
the edge of the fabric. Place the
fabric according to the presser foot
(see picture).
Sewing terry cloth
Terry cloth is a rather loosely woven fabric in
which seams easily break.
Sew the garment together with
straight stitch. Trim the seams and
press the seam allowance flat and
sew the edges down against the
garment on the wrong side with
three-step zig-zag.
Even though the stitching goes right
through to the ”right” side of the
garment, it is nearly invisible and
even the wrong side looks neat. The
stitching will also be considerably
stronger.
Necklines and armholes are finished
in a similar way.
Mending and darning
Three-step zig-zag , can be utilized for
mending and darning. A
threadbare spot is mended
by sewing back and forth
with three-step zig-zag.
Use the reverse feed
button . For every row
of stitching, guide the
fabric slightly to the side. If
the fabric is very worn, a
piece of fabric or lining
may be attached to the
reverse side of the material
as reinforcement.
El tejido esponjoso suele tener una
textura bastante floja, que ceda
fácilmente en las costuras. Cosa y
una la prenda con costura recta.
Después, corte los aumentos
limpiamente y planche ambos
bordes de la costura. Después, cosa
al borde de los cantos, por el revés,
con el zig-zag de tres puntadas.
Aunque la costura traspase el
tejido, es casi invisible y el revés
tiene buena presentación.
El zig-zag de tres puntadas, , es la costura
de utilidad más versátil para
remendar y zurzir. Para
remendar otros desperfec-
tos, bastan unas cuantas
pasadas con el zig-zag de
tres puntadas hacia adelante
y atrás. Utilizar la tecla
marcha atrás y desplace
la tela lateralmente al coser.
Cuando el desperfecto así lo
requiera, suplemente el lado
inferior con un trozo de tela
de refuerzo.
Zig-zag de tres pasos
Sobrehilado
La costura zig-zag de tres pasos,
núm 04 es conveniente para
sobrehilar en la mayoría de los
tejidos. Recorte los bordes antes de
sobrehilar. Procure al coser que las
puntadas cojan bien el borde
tomando los hilos. Coloque la tela
seguir la referencia del prensatelas
(ver illustración).
Tejidos esponjosos
Remendar y zurcir
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Lily 535 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Lily 535 in the language / languages: English as an attachment in your email.

The manual is 0,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info