610257
19
Zoom out
Zoom in
Previous page
1/52
Next page
Instruction book/Manual de instrucciones Lily 535
19
Functions / Infodisplay Funciones / Pantalla de
información
Mirror image
You can mirror a stitch by using the
buttons , mirror image side to side.
You can also mirror the width when you
wish to change the needle's position,
e.g. from left to right. The symbol will be
displayed.
Inversión
Se puede invertir un motivo con la tecla
, inversión longitudinal. Se puede
utilizar la inversión para cambiar la
posición de la aguja, por ejemplo de la
izquierda a la derecha. El símbolo está
indicado en la pantalla cuando está invertido el
motivo.
Ancho de puntada
Cuando se elige un motivo, la máquina
seleccionará automáticamente el ancho de
puntada adecuada, indicada por cifras en la
pantalla. Se puede cambiar el ancho de
puntada al pulsar las teclas (+) o (-). El ancho se
puede regular entre el 0 y 6 mm.
Stitch width
When you select a stitch, the machine
automatically sets the best stitch width
which is dis-played with numbers on the
Infodisplay. You can change the stitch
width by pressing the (+) or (-) button. The
width can be adjusted between 0 and 6 mm.
Stitch selection buttons
You select a stitch from the panel by
pressing the stitch selection buttons.
With left button you get tens and
with right button you get units. The
number of the selected stitch is displayed to
the very right.
Teclas de selección de costura
Con éstas teclas Vd. selecciona una
costura. Con la tecla izquierda Vd.
elige las decenas y con la tecla
derecha las unidades. El núm. de la
costura se indica en la pantalla.
FIX
By using the FIX button you can tie off
a stitch at the beginning and/or at the
end. Touch FIX at the beginning - the
machine sews a few tie off stitches and
goes on with the selected stitch. Touch FIX
while sewing - the machine sews a few tie off
stitches and stops.
FIX
Usando la tecla FIX Vd. puede fijar una
puntada al principio y/o al final. Pulse
FIX al pricipio - la máquina cose algunas
puntadas de fijación y continue coser la
costura seleccionada. Pulse FIX durante la
costura - la máquina cose algunas puntadas
de fijación y se para.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Lily 535 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Lily 535 in the language / languages: English as an attachment in your email.

The manual is 0,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info