610257
16
Zoom out
Zoom in
Previous page
1/52
Next page
Instruction book/Manual de instrucciones Lily 535
16
?????
Presser foot pressure
1. Make sure that the needle
is in the highest position.
Pull the presser foot down
and towards you.
2. Line up the cross pin on the
foot between the spring and
the presser foot ankle. Press
back until the foot snaps into
place.
Palanca de elevación del
prensatelas
Presión del pie del
prensatelas
La presión del pie del prensatelas se
efectúa mediante una rueda graduada,
de ajuste situada en el frento de la
máquina. La posición normal es 4.
Cuanto mayor sea el número de
regulación, mayor será la presión en el
prensatelas. Las telas mullidos se cosen
en posición baja.
The presser foot pressure is adjusted
with the dial on the front of the
machine. Normal setting is 4. The
higher the number the more pressure
on the fabric. Knit and Soft fabrics
should be sewn at low pressure.
Por medio de la palanca
se sube o se baja el
prensatelas. Al coser el
prensatelas debe estar
en su posición inferior.
Se escucha una señal y
el símbolo del prensate-
las parpadea en la pan-
talla de información.
Elevando el prensatelas
lo más alto posible y
manteniéndolo así se
puede incrementar la
altura de elevación en
algunos mm. más.
The presser foot is raised
and lowered with the
presser foot lever. The
presser foot must be
lowered when sewing.
By raising the presser foot
lever as far as it goes and
holding it there, the lift
height of the presser foot
can be increased by
several millimeters.
Presser foot lever
1. Poner primero la aguja en su
posición más alta. Empujar el
prensatelas ligeramente hacia
adelante.
2. Introducir el pasador transver-
sal del prensatelas entre el cuerpo
de éste y el meulle. Empujar
oblicuamente hacia atrás hasta
que el pie encaje.
Cambio del prensatelas
Changing the presser
foot
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Lily 535 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Lily 535 in the language / languages: English as an attachment in your email.

The manual is 0,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info