518115
23
Zoom out
Zoom in
Previous page
1/32
Next page
21
Sewing
Sewing Terry Cloth
Terry cloth is a rather loosely woven fabric
in which seams easily break.
Sew the garment together with straight
stitch. Trim the seams and press the seam
allowance fl at and sew the edges down
against the garment on the wrong side with
three-step zigzag.
Even though the stitching goes right through
to the ”right” side of the garment, it is nearly
invisible and even the wrong side looks
neat.
Seam and Overcast
Some stitches can be used for seaming and
overcasting directly on the edge where a 5
mm (1/4") seam is allowed. Place the fabric
so that the inside right ”toe” of the presser
foot follows the edge of the fabric.
Presser foot J is also used to overlock and
overcast many different fabrics with the
exception of heavy, fi rm fabrics. The pin on
the presser foot should follow the edge of
the fabric and will prevent the fabric from
puckering. Stitch width 5.5 mm. Follow
the recommended setting, given for stitch
length.
Overcast stitch may be used to sew light and
medium non-stretch fabric and light stretch
fabric. Snap on presser foot J.
Overlock is chiefl y used for sewing heavy
stretch fabric. Snap on presser foot B.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Lena at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Lena in the language / languages: English as an attachment in your email.

The manual is 1,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info