518115
13
Zoom out
Zoom in
Previous page
1/32
Next page
11
Procedures
!
Turn off the main switch
Changing the Needle
1. Loosen the screw in the needle clamp
with the screwdriver.
2. Remove the needle.
3. Push up the new needle with the fl at side
away from you until it will go no further.
4. Use the screwdriver to tighten the screw
properly.
Always use needles of system 130/705H.
Changing the Presser Foot
1. Make sure that the needle is in the highest
position. Pull the presser foot towards
you.
2. Line up the cross pin on the foot between
the spring and the presser foot ankle.
Press back until the foot snaps into place.
Presser Foot Pressure
The presser foot pressure is adjusted with
the dial on the front of the machine. Normal
setting is 4. The higher the number the more
pressure on the fabric. Knit and Soft fabrics
should be sewn at low pressure.
Presser Foot Lever
The presser foot is raised and lowered with
the presser foot lever. The presser foot must
be lowered when sewing.
By raising the presser foot lever as far as it
goes and holding it there, the lift height of
the presser foot can be increased by sev-
eral millimeters. This is useful when sewing
heavy materials.
!
Turn off the main switch
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Lena at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Lena in the language / languages: English as an attachment in your email.

The manual is 1,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info