733934
23
Zoom out
Zoom in
Previous page
1/28
Next page
23
Annually (After end of season)
Grinding and balancing the cutter blade. Remove
the spark plug lead. Fitting and removing the blade
require the use of protective gloves. Unscrew the cutter
blade and deliver it to a service workshop for grinding
and balancing. Tighten the screw properly when re as-
sem bling (49–60 Nm).
Jährlich (nach Beendigung der Saison)
Schleifen und Auswuchten des Messers. (Achtung: Vor
Demontage des Messers Zündkabel von der Zünd-
kerze entfernen). Die Klinge nur mit Schutzhandschuhen
einsetzen und entfernen. Schrauben Sie das Messer ab
und bringen dieses in eine Service-Werkstatt. Bei der
Montage die Schrauben richtig anziehen (49–60 Nm).
Annuellement (à fin de la saison)
Aiguisage et équilibrage de la lame. Débrancher la bougie. Mettre des gants de protec-
tion avant de mettre en place ou d’enlever la lame. Démontez-la et donnez-la à aiguiser à un
professionnel. Bien resserer la vis après remontage (49–60 Nm).
Revisión anual (Al terminar la estación)
Afilado y equilibrado de la cuchilla. Se desconecta el cable del encendido de la bujía. El
ajuste y la sustitución de la hoja requiere el uso de guantes protectores. Se desmonta leugo
la cuchilla que es entrega a un taller mecánico para su afilado y equilibrado. Apriétese bien
la tuerca al volver a montar (49–60 Nm).
Jarlijks (na einde van het seizoen)
Slijpen en balanceren van het maaimes. De bougiekabel losmaken. Bij het afstellen en
verwijderen van het mes moeten altijd beschermende handschoenen worden gedragen.
Schroef het mes er af en breng het naar de werkplaats voor slijpen en balanceren. Bij het
weer aanbrengen de schroef goed vastdraaien (49–60 Nm).
Controllo annuale (All fine della stagione)
Rettifica e bilanciamento della lama. Rimuovere il cavo di accensione. Inserire e rimuovere
la lama solamente indossando guanti di protezione. Smontare la lama e consegnarla ad una
officina di servizio per la rettifica ed il bilanciamento. Stringere bene le viti nel rimontaggio
(49–60 Nm).
NOTE: Before tipping mower to drain oil, drain fuel tank
by running engine until fuel tank is empty.
Change oil after each season or after 25 hours running
time. Run the engine warm, remove the spark plug
lead. Remove the dipstick and drain oil. Fill with new
oil. SAE 30 can be used.
HINWEIS: Bevor der Rasenmäner für das Ölablassen auf
die Seite geneigt wird, Treibstofftank ablassen, indem die
Maschine betrieben wird, bis der Kraftstofftank leer ist.
Ölwechsel einmal pro Jahr oder nach 25 Betriebsstun-
den. Den Motor warm laufen lassen, abstellen und das
Zündkerzenkabel abziehen. Die Ölpeilstab heraus und
das Öl ablassen. Danach neues Öl auffüllen SAE 30.
REMARQUE: Avant de renverser la tondeuse pour vidanger l’huile, videz complètement le
réservoir d’essence.
Changez l'huile à chaque saison ou après 25 heures de marche. Allumez le moteur, arrêtez-le
et enlevez le câble d'allumage. Enlevez la jauge à julie et vider l'huile. Puis remplissez avec
de l'huile neuve (les huiles SAE 30 sont utilisables).
NOTA: Antes de inclinar el cortacésped para drenar el aceite, drene el tanque de combustible
haciendo funcionar el motor hasta que el tanque esté vacío.
Cambiar el aceite cada temporada, o después de 25 horas de funcionamiento. Dejar funcio-
nar el motor hasta que se caliente, pararlo y quitar el cable de encendido. Quitar el nivel
de aceite del motor y dejar salir el aceite. Poner después aceite nuevo. Pueden utilizarse los
aceites SAE 30.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna LC 356VB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna LC 356VB in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info