733941
18
Zoom out
Zoom in
Previous page
1/404
Next page
Problem Possible cause Solution
The grass is not cut into mulch. The grass is wet. Do not operate the product when the grass is
wet. Wait until the grass is dry.
The grass is too high. Cut first with the cutting height set high. Low-
er the cutting height and cut again.
Cut only ½ of the cutting width at a time.
One or more of the blades are
not sufficiently sharp.
Sharpen or replace the blades.
The grass is cut irregularly. The wheels are not in correct po-
sition.
Set the cutting height at the same level for all
4 wheels.
One or more of the blades are
not sufficiently sharp.
Sharpen or replace the blades.
The drive system does not oper-
ate correctly
The drive belt is not sufficiently
tight or there is dirt on the pulleys
or drive belt.
Let an approved service agent do mainte-
nance on the drive system.
Transportation, storage and disposal
Transportation and storage
For storage and transportation of the product and
fuel, make sure that there are no leaks or fumes.
Sparks or open flames, for example from electrical
devices or boilers, can start a fire.
Always use approved containers for storage and
transportation of fuel.
Empty the fuel tank before you put the product in
storage for a long period of time. Discard the fuel at
an applicable disposal location
Safely attach the product during transportation to
prevent damage and accidents.
Keep the product in a locked area to prevent access
for children or persons that are not approved.
Keep the product in a dry and frost free area.
Disposal
Obey the local recycling requirements and applicable
regulations.
Discard all chemicals, such as engine oil or fuel, at a
service center or at an applicable disposal location.
When the product is no longer in use, send it to a
Husqvarna dealer or discard it at a recycling
location.
18 1242 - 003 - 01.11.2019
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna LC 353AWD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna LC 353AWD in the language / languages: All languages as an attachment in your email.

The manual is 8,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info