733985
13
Zoom out
Zoom in
Previous page
1/580
Next page
Use this product to cut grass
lawns only. It is not permitted
to use it for other tasks.
Use personal protective
equipment. Refer to
Personal
protective equipment on page
14
.
Make sure that you know how
to stop the motor quickly in an
emergency.
Do not operate the product in
rain or wet conditions. The
risk of electrical shock
increases if water enters the
product.
Do not operate the product
unless the blade and all
covers are attached correctly.
An incorrectly attached blade
can come loose and cause
personal injury.
Make sure that the blade
does not hit objects such as
stones and roots. This can do
damage to the blade and
bend the motor shaft. A bent
axle causes heavy vibration
and a very high risk that the
blade becomes loose.
If the blade hits an object or if
vibrations occur, stop the
product immediately. Stop the
motor, turn the safety key to 0
and remove the battery
(model LC 141iV and
LC 141i) or disconnect the
power cord (model LC 141C).
Examine the product for
damages. Repair damages or
let an authorised service
agent do the repair.
Never attach the motor brake
handle permanently to the
handle when the motor is
started.
Put the product on a stable,
flat surface and start it. Make
sure that the blade does not
hit the ground or other
objects.
Always stay behind the
product when you operate it.
Let all the wheels stay on the
ground and keep 2 hands on
the handle when you operate
the product. Keep your hands
and feet away from the
rotating blades.
Do not tilt the product when
the motor is started.
Be careful when you pull the
product rearward.
Never lift up the product when
the motor is started. If you
must lift the product, first stop
the motor, turn the safety key
to 0 and remove the battery
(model LC 141iV and
LC 141i) or disconnect the
power cord (model LC 141C).
Do not walk rearward when
you operate the product.
Stop the motor when you
move across areas without
grass, for example paths
919 - 003 - 23.10.2019
13
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna LC 141iV at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna LC 141iV in the language / languages: All languages as an attachment in your email.

The manual is 7,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info