518111
16
Zoom out
Zoom in
Previous page
1/60
Next page
14
Functions and InfoDisplay
Reverse
REVERSE is touched to sew in
reverse. When the button is
released, Interlude sews forwards.
The longest reverse stitch length is
3 mm.
For permanent reverse, touch the
button twice in quick succession
before starting to sew. The reverse
sewing is indicated by an icon on
the InfoDisplay.
Interlude sews in reverse until you
touch the button again.
Stitch length
When you select a stitch, your
Interlude automatically sets the
best stitch length. The set length is
visible on the InfoDisplay above
the stitch length buttons. You can
change the stitch length by touching
either the (+) or (-) button.
Stitch width
The stitch width is set in the same
manner as the stitch length. The set
width is visible on the InfoDisplay
above the stitch width buttons. The
width can be adjusted between
0 and 6 mm. If straight stitch is
selected, the width button is used to
adjust the needle position.
Stop
STOP is used to conclude a stitch.
Your Interlude fastens the thread
and stops automatically when a
stitch or stitch sequence has been
completed. STOP is cancelled when
you touch the button again or by
selecting a new stitch. When STOP
is active, an icon is shown on the
InfoDisplay. The stop-function can
also be programmed.
Mirror Side to Side
Touch this button to mirror the
selected stitch side to side. If this
button is touched when straight
stitch with left needle position
is selected, the needle position
is changed from left to right. If
touched in
REP, the whole stitch
combination is mirrored (see page
22).
The Functions Panel
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Interlude 435 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Interlude 435 in the language / languages: English as an attachment in your email.

The manual is 4,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info