518111

Husqvarna Interlude 435 Manual

9
Zoom out
Zoom in
Previous page
1/60
Next page
7
a
b
1
3
2
4
5
6
7
Learn your Interlude
Threading the Upper Thread
Make sure the presser foot is raised and
the needle is in the up position
1 Pull the spool pin out. Place the
thread on the spool pin and the spool
holder on the spool pin as described.
Push the spool pin back in.
2 Bring the thread in the direction of
the arrow under the thread guide (a)
and over the thread guide (b).
3 Bring the thread down between the
thread tension discs.
4 Continue threading by drawing the
thread from the right into the slot on
the take-up lever.
5 Thread last guide just above the
needle.
6 The needle is threaded from front to
back. The white on the presser foot
ankle makes it easy to see the eye of
the needle.
7 Place thread under the presser foot
and into the thread knife where it is
cut.
Threading for Twin Needle
!
Turn off the main switch.
1 Insert a twin needle.
2 Use a second thread spool or wind a
bobbin with the thread you are going
to use as the second upper thread.
3 LEFT NEEDLE: Thread the machine and
check to ensure that the thread lies
between the inner thread tension discs,
and inside the last thread guide. Thread
the left needle.
4 Attach the extra spool pin onto the
machine. Place a spool holder under
the thread.
5 Place the bobbin with the second
thread on the spool pin.
6 RIGHT NEEDLE: Thread the machine
as before but this thread should lie
between the outer thread tension
discs, outside the lowest thread guide.
Thread right needle.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Interlude 435 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Interlude 435 in the language / languages: English as an attachment in your email.

The manual is 4,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info