518063
34
Zoom out
Zoom in
Previous page
1/56
Next page
32
1
0
1
Corded Buttonhole
(1) Stitch selector: 1
(2) Stitch width: 4 - 6
(3) Stitch length: 0.5 - 1
(4) Top thread tension: 2 - 5
(5) Presser foot: R: Automatic
buttonhole
foot
1. Use the same procedure as described in
automatic buttonhole sewing steps.
Note: Set the stitch width to match the
thickness of the cord used.
(1) With the buttonhole foot raised,
hook the fi ller cord on the spur at the
back of the buttonhole foot.
Bring the ends toward you under the
buttonhole foot, clearing the front end.
Hook the fi ller cord into the forks on
the front of automatic buttonhole foot R
to hold them tight.
Lower the needle into the garment
where the buttonhole will start and
lower the foot.
2. Depress the foot control gently and
sew the buttonhole. Each side of the
buttonhole and the bartacks will be
sewn over the cord.
Remove the fabric from the machine
and cut the sewing threads only.
(2) Needle thread
(3) Bobbin thread
(4) Starting point
3. Pull the left end of the fi ller cord to
tighten it. Thread the end of the cord
through a darning needle, draw to the
wrong side of the fabric and cut.
Note: To cut the buttonhole opening, refer
to the instructions on page 30.
(1) (2) (3)
(4) (5)
(1)
(2)
(4)
(3)
1
2
3
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Huskystar 219 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Huskystar 219 in the language / languages: English as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info